Campomatic

DW909XE - Dishwasher Campomatic - Free user manual and instructions

Find the device manual for free DW909XE Campomatic in PDF.

📄 25 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Campomatic DW909XE - page 12
Pick your language and provide your email: we'll send you a specifically translated version.
TypeBuilt-in dishwasher
Width60 cm
Height85 cm
Depth60 cm
Weight45 kg
Place settings14
Energy classA+
Annual energy consumption290 kWh
Water consumption per cycle9.5 L
Noise level47 dB(A)
Number of programs6
ProgramsEco, Intensive, Normal, Quick, Glass, Rinse
Drying systemCondensation drying
DisplayLED
Delay startUp to 24 hours
Water connectionCold water only
Electrical connection220-240 V, 50 Hz, 10 A
Spare parts availabilityAt least 7 years
Repair index8.0 / 10
BrandCampomatic
ModelDW909XE

Frequently Asked Questions - DW909XE Campomatic

How do I install the DW909XE dishwasher?
Ensure the appliance is placed on a level surface. Connect the inlet hose to a cold water supply with a 3/4 inch thread. Plug the power cord into a grounded outlet. For detailed steps, refer to the installation section in the user manual.
What should I do if the dishwasher doesn't start?
Check if the door is properly closed and latched. Verify that the power cord is plugged in and the circuit breaker hasn't tripped. Also ensure the water supply is turned on and the filter is not clogged.
How do I clean the filters?
Turn off the dishwasher and remove the lower rack. Unscrew the cylindrical filter and rinse it under running water. Also clean the flat filter. Ensure filters are fully dry before reassembling. Clean monthly.
Why are dishes not drying completely?
Use the Extra Dry option if available. Make sure the rinse aid dispenser is filled. Also check that the drying fan is not blocked. For plastic items, wipe residual moisture.
What do error codes mean?
Refer to the troubleshooting table in the manual. Common codes: E1 (water inlet issue), E4 (overfill), E8 (heating element problem). Reset the appliance by unplugging for 1 minute.
Can I use regular dish soap?
No, only use dishwasher detergent specifically designed for dishwashers. Regular soap creates excessive foam and may cause leaks or damage.
How to load dishes for best cleaning?
Place larger items like pots and pans on the lower rack facing down. Arrange plates and bowls on the upper rack. Ensure water spray can reach all surfaces. Avoid overloading.
How do I descale the dishwasher?
Use a commercial dishwasher descaler. Run a hot cycle with the descaler in the detergent compartment. Alternatively, use citric acid. Descale every 3-6 months depending on water hardness.
What is the noise level and how to reduce it?
The noise level is 47 dB(A). Ensure the dishwasher is level to minimize vibrations. Do not overload and check for loose items rattling.
How to replace the spray arms?
Turn off power to the dishwasher. Remove the upper rack to access the upper spray arm, unscrew it. For the lower spray arm, remove the lower rack and unscrew. Reverse steps to install new arms.

User questions about DW909XE Campomatic

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Dishwasher in PDF format for free! Find your manual DW909XE - Campomatic and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DW909XE by Campomatic.

USER MANUAL DW909XE Campomatic

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Campomatic

Model : DW909XE

Category : Dishwasher