EK-1 - Knife WINDMERE - Free user manual and instructions

Product Type	Electric Carving Knife
Brand	Windmere
Model	EK-1
Power Source	AC electrical outlet (household current)
Plug Type	Polarized plug (one blade wider)
Safety Lock	Safety lock peg on power switch
Blade Release	Blade release button on handle
Blade Type	Serrated stainless steel blades
Blade Attachment	Insert blades into handle until click
Slicing Guide	Adjustable slicing guide for uniform thickness
Guide Adjustment	Push guide bar side to side to set width
Blade Cleaning	Wash in warm soapy water or dishwasher
Handle Cleaning	Wipe with soft damp cloth; do not immerse
Lubrication	Permanently lubricated; no user maintenance required
Storage	Store in plastic shield in clean dry place; do not wrap cord tightly
Cord Safety	Do not operate if cord damaged; replace by qualified service
Intended Use	Household use only; not for frozen foods
Warranty	One year limited warranty

Frequently Asked Questions - EK-1 WINDMERE

How do I insert the blades into the Windmere EK-1?

First, ensure the knife is unplugged. Attach the two blades together by inserting the rivet on one blade into the slot on the other and sliding them together. Hold the blades with serrated edges away from you, then insert them into the slot in the handle until you hear a click. Finally, remove the protective cover.

Can I use the EK-1 to cut frozen food?

No, do not attempt to cut through frozen foods with this electric carving knife. It is designed for household use on normal foods only.

How do I clean the blades and handle of the EK-1?

Unplug the knife and remove the blades. Separate the blades by sliding the rivet out of the slot. Wash blades in warm soapy water or in a dishwasher. Wipe the handle with a soft, slightly damp cloth. Do not immerse the handle in water or allow liquid inside.

How does the safety lock work?

The power switch has a safety lock peg. To operate, slide the peg to the unlock position, then depress the switch. The knife will only operate when the peg is unlocked. After use, slide it back to locked and unplug.

How do I adjust the slicing guide thickness?

With the knife unplugged, position the guide to desired thickness by pushing the guide bar from side to side. This determines the exact width of the slice.

Can I use the EK-1 outdoors?

No, this appliance is for household use only and should not be used outdoors. Do not let cord contact hot surfaces or water.

What should I do if the power cord is damaged?

If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or a similarly qualified person to avoid hazard. Do not operate the appliance if the cord shows any damage.

How do I remove the blades safely?

Unplug the knife. Grasp the top of the blades with serrated edges away from you, press the blade release button, and carefully pull the blades from the handle.

Is the EK-1 dishwasher safe?

The blades are dishwasher safe. However, the handle must never be immersed in water or placed in the dishwasher. Clean the handle with a damp cloth only.

What is the warranty period for the Windmere EK-1?

The product is warranted for one year from the original date of consumer purchase against defects in material or workmanship. It does not cover damage from accident, misuse, or unauthorized repairs.

USER MANUAL EK-1 WINDMERE

1. Protective Thumb Guard

1. Power Switch with Safety Lock Peq

1. Blade Release Button

FIG. 1

DO NOT INSERT OR REMOVE BLADES WHILE UNIT IS PLUGGED IN. KEEP FINGERS

AWAY FROM SHARP BLADE.

NO COLOQUE O RETIRE LAS CUCHILLAS MIENTRAS LA UNIDAD ESTA ENCHUFADA.

This appliance is for HOUSEHOLD USE ONLY and may be plugged into any AC electrical outlet (ordinary household current).

HOW TO USE THIS ELECTRIC CARVING KNIFE

For protection, the power switch has a safety lock. To operate, plug in and slide the safety lock peg to the unlock position; depress the power switch and knife will be in full operation. When you are finished carving, return the safety lock peg to the locked position and unplug. Knife will only operate when safety lock peg is in the unlocked position.

Place knife directly on food to be carved. Press the power switch, and the knife will begin to slice. Guide the knife in the direction you wish to slice. There is no need to apply any pressure; the knife will do the work. It is best to use a cutting board when carving food with the electric knife to avoid scratching or chipping plates. Do not attempt to cut through frozen foods.

CAUTIONS:

Never insert or remove blades while knife is still plugged in. Always hold the blades with the serrated edges away from you.

HOW TO INSERT BLADES

Attach the two blades together by inserting the rivet on one blade into the slot on the other and sliding them together. Be sure the drip guards are lined up evenly.

Grasp the top of the knife blades with the serrated edges away from you, and insert the blades into the slot in the handle. Push both blades in until you hear them click into place. Remove protective cover.

HOW TO ATTACH SLICING GUIDE

Turn unit off and unplug from the electrical outlet. To avoid injury from sharp blade edges, place protective cover over serrated blades, and press blade release button to remove blades from handle. NOTE: Blades must be removed from handle before slicing guide can be attached to unit (Fig. 2). Attach slicing guide assembly by snapping it onto handle so that the tab on the guide fits firmly into slot on handle. Check to see that guide is securely fastened, and that rounded edge of guide bar is parallel with bottom of unit. With protective cover in place, reattach blades. Before removing protective cover, check to make sure that serrated sides of blades are parallel with rounded edge of guide bar (Fig. 3). Remove protective cover. Plug in. Unlock and depress the power switch to begin slicing.

TO ADJUST SLICING GUIDE

Position guide to the desired thickness by pushing the guide bar from side to side to determine the exact width (Fig. 3).

TO DETACH THE SLICING GUIDE

Turn off unit and disconnect power. Unsnap and pull off from bottom of stand.

NOTE: Serrated blades are sharp; use caution when attaching and

detaching slicing guide.

HOW TO REMOVE BLADES

Unplug from electrical outlet. Grasp top of the knife blades, making sure serrated edges are facing away from you, and press the blade release button. Then carefully pull the blades from the handle.

CARE AND CLEANING

This appliance is permanently lubricated and will not require additional lubrication for the life of the unit. It contains no user serviceable parts. Refer service to qualified service personnel.

WHILE USING: Untwist cord from time to time to avoid tangling.

TO CLEAN:

1. Unplug unit. Remove blades from the power handle before washing. Separate blades by sliding the rivet for one blade out of the slot of the other blade.

2. Wash the blades in warm soapy water. Blades may also be washed in a dishwasher. Rinse and dry thoroughly; store blades in the plastic shield.

3. Use a soft, slightly damp cloth to wipe handle surface. Do not allow water or any other liquid to get into the handle. DO NOT IMMERSE HANDLE IN WATER.

TO STORE: Unplug appliance, and store in its box or in a clean, dry place. Never wrap the cord tightly around the appliance. Do not put any stress on the cord where it enters the unit, as it could cause the cord to fray and break.

COMO USAR

This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not modify the plug in any way.

LINE CORD SAFETY TIPS

1. Never pull or yank on the cord or the appliance.

2. To insert plug, grasp it firmly and guide it into outlet.

3. To disconnect appliance, grasp plug and remove it from outlet.

4. Before each use, inspect the line cord for cuts and/or abrasion marks. If any are found, this indicates that the appliance should be serviced and the line cord replaced. Please return it to our Service Department or to an authorized service representative.

5. Never wrap the cord tightly around the appliance, as this could place undue stress on the cord where it enters the appliance and cause it to fray and break.

DO NOT OPERATE APPLIANCE IF THE LINE CORD SHOWS ANY DAMAGE, OR IF APPLIANCE WORKS INTERMITTENTLY OR STOPS WORKING ENTIRELY.

If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or similarly qualified person in order to avoid a hazard.

CONSERVE ESTAS INSTRUCCIONES

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should always be followed, including the following:

■ READ ALL INSTRUCTIONS.

■ To protect against risk of electrical shock, do not put the electric knife and blades into water or other liquid.

■ Close supervision is necessary when appliance is used by or near children or invalids.

■ Unplug from outlet when not in use, before putting on or taking off parts, and before cleaning. Disconnect when changing blades.

■ Avoid contacting moving parts.

■ Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions or is dropped or damaged in any manner. Return appliance to the nearest authorized service facility for examination, repair or electrical or mechanical adjustment.

■ The use of attachments not recommended or sold by the appliance manufacturer may cause fire, electric shock or injury.

■ Do not use outdoors.

■ Do not let cord hang over edge of table or counter

■ Do not let cord contact hot surface, including the stove.

■ Do not operate knife in water or under running water.

■ Blades are sharp. Handle carefully. Always handle blades with hand away from cutting edge. Always store blades with cutting edge away from you.

SAVE THESE INSTRUCTIONS

NEED HELP?

Service, if necessary, must be performed by Household Products or Authorized Household Appliance Service Center. The Service Center nearest you can be found in the yellow pages of your phone book under "Appliances – Small." If mailing or shipping your unit, pack it carefully in a sturdy carton with enough packing material to prevent damage. Include a note describing the problem to our Service Center and be sure to give your return address. We also suggest that you insure the package for your protection.

ONE-YEAR WARRANTY

Household Products warrants this product against any defects that are due to faulty material or workmanship for a one-year period after the original date of consumer purchase. This warranty does not include damage to the product resulting from accident or misuse, or repairs performed by non-authorized repair shops. If the product should become defective within the warranty period, we will repair it or elect to replace it free of charge. To honor this warranty, the product with the corresponding registration card is required. This warranty gives you specific legal rights and you may also have other rights which vary from state to state or province to province. For answers to any questions, contact your nearest Household Products or Authorized Household Appliance Service Center.

¿NECESITA AYUDA?

SAVE THIS USE AND CARE BOOK

ELECTRIC CARVING KNIFE WITH SLICING GUIDE

CUCHILLO ELECTRICO

CON GUIA PARA CORTAR

Line drawing of a mechanical tool with a handle and power outlet (no text or symbols)

READ ALL INSTRUCTIONS BEFORE USING THIS PRODUCT LEA ESTE INSTRUCTIVO ANTES DE USAR ESTE PRODUCTO

MODEL/MODELO EK-1

+ EK-1A