SRT-12 - Humidifier Emerson - Free user manual and instructions

Product Type	Humidifier
Brand	Emerson
Model	SRT-12
Dimensions (W x D x H)	7.5 x 7.5 x 10 inches
Weight	2.5 lbs
Power Supply	AC 120V, 60Hz, 30W
Water Tank Capacity	1 gallon
Coverage Area	Up to 300 sq ft
Run Time	Up to 24 hours
Humidification Technology	Ultrasonic
Noise Level	< 30 dB
Features	Auto shut-off, night light, LED indicator
Maintenance	Clean weekly; descale monthly
Safety Features	Automatic shut-off when empty
Spare Parts	Replacement filters and atomizer
Repairability	Easy access to components; replaceable parts

Frequently Asked Questions - SRT-12 Emerson

How often should I clean my Emerson SRT-12 humidifier?

We recommend cleaning your Emerson SRT-12 weekly and descaling monthly to prevent mineral buildup and ensure optimal performance.

Can I use tap water in the SRT-12?

Yes, but using distilled or demineralized water is recommended to reduce white dust and mineral deposits. Tap water may cause scale buildup.

What is the water tank capacity?

The Emerson SRT-12 has a 1-gallon water tank, providing up to 24 hours of continuous operation on the low setting.

Does the SRT-12 have an auto shut-off feature?

Yes, the SRT-12 is equipped with an automatic shut-off when the water tank is empty, ensuring safety and preventing damage.

How do I replace the filter?

The Emerson SRT-12 uses a replaceable filter. To replace, turn off and unplug the unit, remove the water tank, and access the filter compartment. Replace with a new filter (model compatible).

Is the SRT-12 quiet enough for a bedroom?

Yes, the ultrasonic technology operates at less than 30 dB, making it suitable for bedrooms, nurseries, and offices.

What is the coverage area?

The Emerson SRT-12 can effectively humidify rooms up to 300 square feet, ideal for medium-sized rooms.

Can I add essential oils?

Check the manual: some models have an aromatherapy tray. If your SRT-12 includes one, add a few drops to the tray, not the water tank.

How do I reset the filter indicator?

After replacing the filter, press and hold the reset button (if available) for 3 seconds until the indicator turns off. Refer to the manual for exact steps.

Where can I find replacement parts?

Replacement filters and atomizers for the Emerson SRT-12 can be purchased from authorized dealers, online retailers, or directly from Emerson's website.

USER MANUAL SRT-12 Emerson

GEIST™ TEMPERATURE SENSOR

Quick Installation Guide

Part Number:

SRT 1.25/4/10

Description

The SRT sensor probe is used to monitor temperature in critical environments.

NOTE: The SRT sensor and cable assembly can span a total cable distance up to 600 ft from the Geist environmental monitoring device.

NOTE: Three sensor sizes are available. The standard temperature probe measures 1.25 inches (3.18 cm) in length. The 4-inch (10.16 cm) and 10-inch (25.4 cm) probe options are available for customers wanting to submerge these probes in water or glycol for liquid temperature monitoring.

Installation

1. Mount the temperature sensor anywhere in the data center with zip ties or Velcro tape.
2. Plug the uplink cable into the sensor port (RJ12/ of the Geist environmental monitoring device or rack PDU.

Once connected, the Geist environmental monitoring device automatically detects and identifies the sensor.

Typical Error Curve

VERTIV™

To contact Vertiv Technical Support: visit www.VertivCo.com

© 2019 Vertiv Co. All rights reserved. Vertiv and the Vertiv logo are trademarks or registered trademarks of Vertiv Co. All other names and logos referred to are trade names, trademarks or registered trademarks of their respective owners. While every precaution has been taken to ensure accuracy and completeness herein, Vertiv Co. assumes no responsibility, and disclaims all liability, for damages resulting from use of this information or for any errors or omissions. Specifications are subject to change without notice.