DIN-AP3MEX - Uncategorized Crestron - Free user manual and instructions
Find the device manual for free DIN-AP3MEX Crestron in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | 3-Series Control Processor |
| Brand | Crestron |
| Model | DIN-AP3MEX |
| Dimensions (H x W x D) | 5.2" x 3.6" x 2.3" (132 mm x 91 mm x 58 mm) |
| Weight | 0.6 lbs (272 g) |
| Power Supply | 24V DC, 0.5A |
| Mounting | DIN rail mount (35 mm) |
| Processor | Crestron 3-Series engine |
| Ethernet | 10/100 Mbps, built-in |
| Control Ports | IR, RS-232, relays, digital I/O |
| Maximum Devices Supported | Up to 100 devices |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
| Humidity | 10% to 90% non-condensing |
| LED Indicators | Power, LAN, and data activity |
| Maintenance | Clean with a dry, soft cloth |
| Safety | Install in a dry, ventilated location |
| Spare Parts | Power supply, mounting clips |
| Repairability | Contact Crestron service center |
| Compliance | CE, FCC, UL |
Frequently Asked Questions - DIN-AP3MEX Crestron
How do I factory reset the DIN-AP3MEX?
Press and hold the reset button on the front panel for 10 seconds until the LEDs flash. This restores factory defaults.
What power supply is recommended?
A 24V DC power supply with at least 0.5A output. Use Crestron PW-2405 or equivalent.
Can I control third-party devices?
Yes, via IR, RS-232, or IP. The 3-Series engine supports Crestron drivers for many brands.
How do I update the firmware?
Use Crestron Toolbox software. Connect via USB or Ethernet and follow the update wizard.
What is the maximum wire gauge for screw terminals?
Use 26 to 12 AWG wire. Tighten to a torque of 0.5 Nm.
How many RS-232 ports does it have?
It has one RS-232 port with hardware handshaking.
Can it be integrated with Crestron Home?
Yes, it supports Crestron Home as a processor.
What do the LEDs indicate?
Power (green when on), LAN (blinks with activity), and data (blinks on commands).
Is it compatible with 3-Series cards?
Yes, it supports up to 3 Crestron 3-Series expansion cards.
How do I clean the device?
Disconnect power and wipe with a dry, lint-free cloth. Do not use liquids.
User questions about DIN-AP3MEX Crestron
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual DIN-AP3MEX - Crestron and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DIN-AP3MEX by Crestron.