DS-2CD4626FWD-IZHS/P - Security Camera Hikvision - Free user manual and instructions
Find the device manual for free DS-2CD4626FWD-IZHS/P Hikvision in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Network Bullet Camera |
| Model | DS-2CD4626FWD-IZHS/P |
| Brand | Hikvision |
| Resolution | 2 Megapixel (1920 x 1080) |
| Sensor | 1/2.8" Progressive Scan CMOS |
| Lens | Motorized varifocal, 2.8-12mm |
| IR Range | Up to 50 m (164 ft) |
| Day/Night | ICR |
| WDR | 120 dB |
| Video Compression | H.265+ / H.265 / H.264+ / H.264 |
| Frame Rate | 30 fps @ 1920x1080 |
| Protection Rating | IP67 |
| Power Supply | 12 VDC ± 25%, PoE (802.3at) |
| Power Consumption | Max. 12.5 W (with IR) |
| Dimensions (Ø x L) | Approx. 100.3 x 283.5 mm |
| Weight | Approx. 1.2 kg |
| Operating Temperature | -40 °C to 60 °C (-40 °F to 140 °F) |
| Humidity | 95% or less (non-condensing) |
| Interface | 1 RJ45 10M/100M self-adaptive Ethernet port |
| Audio | 1 audio input, 1 audio output |
| Alarm | 1 alarm input, 1 alarm output |
| Storage | MicroSD slot (up to 256 GB) |
| Main Functions | Motion detection, line crossing, intrusion detection, face detection |
| Cleaning | Clean lens with soft dry cloth; avoid solvents |
| Safety | Use only approved power supply; install by qualified personnel |
| Spare Parts | Contact Hikvision authorized service center |
| General Information | For outdoor use; mounting bracket included |
Frequently Asked Questions - DS-2CD4626FWD-IZHS/P Hikvision
How do I reset the camera to factory defaults?
Press and hold the reset button on the camera for 10 seconds, or use the web interface under Maintenance.
What is the default IP address of the camera?
Default IP is 192.0.0.64, username admin, password 12345. Change after first login.
How do I connect the camera to my network?
Use an Ethernet cable to connect to a PoE switch or injector. Alternatively, use 12 VDC power supply.
Can the camera record to an SD card?
Yes, it supports a MicroSD card up to 256 GB for local recording.
What should I do if the camera image is blurry?
Adjust the focus ring on the lens manually. For motorized lens, use the web interface to adjust focus.
How do I enable motion detection?
Log into the camera's web interface, go to Event > Motion Detection, enable and set areas.
Is the camera compatible with third-party NVRs?
Yes, it supports ONVIF Profile S/G/T for interoperability.
How do I update the firmware?
Download the latest firmware from Hikvision website, upload via web interface under Maintenance > Firmware Upgrade.
What is the video format supported?
H.265+ H.265 H.264+ H.264; compression can be selected in settings.
How do I clean the camera?
Use a soft, dry cloth to wipe the housing and lens. Do not use harsh chemicals or water directly.
User questions about DS-2CD4626FWD-IZHS/P Hikvision
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Security Camera in PDF format for free! Find your manual DS-2CD4626FWD-IZHS/P - Hikvision and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DS-2CD4626FWD-IZHS/P by Hikvision.