XTP9B-PKI-R - Router Digi - Free user manual and instructions
Find the device manual for free XTP9B-PKI-R Digi in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Industrial Router |
| Brand | Digi |
| Model | XTP9B-PKI-R |
| Dimensions (L x W x H) | 4.5 x 3.5 x 1.2 in (114 x 89 x 30 mm) |
| Weight | 0.5 lb (230 g) |
| Power Input | 5–30 VDC, 1.5 A |
| Power Connector | 2-pin screw terminal |
| Ethernet Ports | 1 x 10/100 Base-T (RJ45) |
| Serial Port | 1 x RS-232/422/485 (DB9) |
| Wireless | 900 MHz ISM band, up to 200 mW |
| Protocols | TCP, UDP, DHCP, Modbus, SNMP |
| Operating Temperature | -40 to 85°C (-40 to 185°F) |
| Mounting | DIN rail or wall mount |
| LED Indicators | Power, Link, Activity, Signal |
| Antenna Connector | Reverse polarity SMA |
| Certifications | FCC, IC, CE |
| Maintenance | Clean with dry, lint-free cloth; avoid liquids |
| Safety | Use only with supplied or certified power supply |
| Spare Parts | Not available; device is not user-serviceable |
| Reparability | Contact Digi support for repairs |
| General Information | Digi XTP9B-PKI-R is a rugged industrial router for serial-to-Ethernet bridging over long-range radio. |
Frequently Asked Questions - XTP9B-PKI-R Digi
How do I connect power to the XTP9B-PKI-R?
Connect a 5-30 VDC power supply to the 2-pin screw terminal. Ensure polarity is correct. Use a Class 2 power supply.
What is the default IP address?
The default IP address is 192.168.1.1. You can access the web interface via a browser.
How do I reset the router to factory defaults?
Press and hold the reset button for 10 seconds until the LED blinks rapidly. Release to restore factory settings.
Can I use this router outdoors?
Yes, it is rated for industrial temperatures and can be used outdoors in an enclosure. It is not waterproof.
What type of antenna does it use?
It uses a reverse polarity SMA connector. A suitable 900 MHz antenna is required.
How do I configure the serial port?
Use the web interface or Digi Device Discovery tool. Set baud rate, parity, and mode (RS-232/422/485).
Is the device compatible with Modbus?
Yes, it supports Modbus RTU/ASCII over serial and Modbus TCP over Ethernet.
What is the maximum range?
Range depends on environment; typically up to 15 km line-of-sight with proper antennas.
How do I update the firmware?
Download the latest firmware from Digi's website, then upload via the web interface under Administration > Firmware Upgrade.
Where can I find the user manual?
The manual is available for free on notice-facile.com in PDF format. Search for XTP9B-PKI-R.
User questions about XTP9B-PKI-R Digi
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Router in PDF format for free! Find your manual XTP9B-PKI-R - Digi and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. XTP9B-PKI-R by Digi.