SX878D46PE - Dishwasher SIEMENS - Free user manual and instructions
Find the device manual for free SX878D46PE SIEMENS in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Fully Integrated Dishwasher |
| Brand | Siemens |
| Model | SX878D46PE |
| Width | 60 cm |
| Height (min) | 81.5 cm |
| Depth | 55 cm |
| Weight | 45 kg |
| Energy Efficiency Class | A |
| Annual Energy Consumption | 250 kWh |
| Annual Water Consumption | 2660 L |
| Capacity | 14 place settings |
| Noise Level | 42 dB(A) |
| Number of Programs | 6 |
| Drying Technology | Zeolith drying |
| Safety Features | AquaStop, Child Lock |
| Smart Features | Home Connect |
| Special Features | VarioSpeed Plus, VarioDrawer |
| Water Softening | Yes |
| Voltage | 220-240 V |
| Frequency | 50-60 Hz |
| Power Consumption (Standby) | 0.5 W |
| Included Accessories | Inlet hose, outlet hose, cutlery basket, salt funnel |
Frequently Asked Questions - SX878D46PE SIEMENS
How do I install the dishwasher?
Ensure the installation space is 60 cm wide, 81.5 cm high, and 55 cm deep. Connect the inlet hose to a cold water supply with a 3/4 inch thread. The outlet hose must be connected to a siphon with a minimum height of 40 cm. Secure the appliance using the provided mounting brackets. For detailed steps, refer to the installation manual.
What detergent should I use?
Use a phosphate-free detergent designed for dishwashers. You can use powder, gel, or tablets (like all-in-1). For best results, follow the dosage recommendations on the detergent package based on water hardness. Avoid using hand dish soap as it can cause excessive suds.
How do I clean the filter?
Turn off the dishwasher and remove the lower rack. Rotate the microfilter counterclockwise and lift it out. Rinse it under running water, and clean the fine filter inside with a soft brush. Reassemble in reverse order. Clean the filter at least once a month to maintain performance.
What does error code E:15 mean?
E:15 indicates a water leakage in the base tray. The AquaStop system has activated. Turn off the water supply and unplug the appliance. Check for leaks in the hoses and connections. Contact Siemens customer service for repair if needed. You can reset the error by pressing the Start button for 3 seconds after fixing the leak.
How do I adjust the water hardness setting?
Press and hold the Start button for 5 seconds until the display shows a number. Use the program buttons to set the hardness level according to a water hardness test strip (1-7). Confirm by pressing Start again. This ensures optimal salt usage and prevents limescale.
Why are my dishes not drying properly?
Check if the rinse aid is full and the setting is appropriate. Also, use a drying program (like Extra Dry) and ensure the dishwasher is not overloaded. Open the door slightly after the cycle to allow steam to escape. For persistent issues, check the Zeolith drying system (if equipped) for blockages.
How do I connect the dishwasher to Wi-Fi?
Download the Home Connect app on your smartphone. Press and hold the Info button for 3 seconds to enter pairing mode. Follow the app instructions to connect to your home network. Ensure the dishwasher is within range of your router.
What is AquaStop and how does it work?
AquaStop is a safety system that prevents water damage. The inlet hose has a double-walled design and a solenoid valve that shuts off water if a leak is detected. The base tray contains a float switch that also triggers the valve. This system is guaranteed for the lifetime of the appliance.
How do I start a program?
Load the dishes, add detergent and rinse aid. Close the door, select a program (e.g., Eco, Intensive) using the program buttons, and then press Start. The cycle begins after a few seconds. To delay start, press the Delay button and set the desired time.
What maintenance should I do regularly?
Monthly: clean the filter, check spray arms for blockages, and run a cleaning cycle with a dishwasher cleaner. Every 6 months: clean the door seals and remove any debris from the drain pump filter. Also, descal the appliance if you live in a hard water area using a descaler.
User questions about SX878D46PE SIEMENS
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Dishwasher in PDF format for free! Find your manual SX878D46PE - SIEMENS and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SX878D46PE by SIEMENS.