Control 126 WT - Pregnant JBL - Free user manual and instructions
Find the device manual for free Control 126 WT JBL in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | In-wall speaker |
| Series | Control Contractor |
| Driver Configuration | 2-way |
| Woofer | 6.5-inch polypropylene |
| Tweeter | 0.75-inch titanium-coated dome |
| Frequency Response | 65 Hz – 22 kHz |
| Power Handling (Program) | 100 W |
| Impedance | 8 ohms (nominal) |
| Sensitivity (1W/1m) | 88 dB SPL |
| Coverage Angle | 120° conical |
| Dimensions (Cutout) | 8.25 x 12.5 in (210 x 318 mm) |
| Dimensions (Grille) | 9.5 x 13.75 in (241 x 349 mm) |
| Depth Behind Wall | 3.5 in (89 mm) |
| Weight (per speaker) | 4.5 lb (2.0 kg) |
| Mounting | Dog-leg clamps with integrated bracket |
| Grille | Perforated steel, paintable |
| Connectors | Spring-loaded terminals |
| Transformer Taps (optional) | 70V/100V: 15W, 7.5W, 3.75W, 1.9W |
| Compliance | UL 1480, UL 2043, CE, RoHS |
| Warranty | 5 years (limited) |
| Finish | White (paintable) |
| Included Accessories | Cutout template, mounting screws, paint shield |
Frequently Asked Questions - Control 126 WT JBL
What is the recommended amplifier power for the Control 126 WT?
A typical amplifier delivering 30–100 watts RMS per channel is recommended. Ensure the amplifier is rated for 8 ohms.
Can I paint the grille to match my decor?
Yes, the perforated steel grille is paintable. Use a thin coat of spray paint and avoid clogging the perforations. Remove the grille before painting.
What is the cutout size required for installation?
The cutout size is 8.25 x 12.5 inches (210 x 318 mm). Use the included template for precise marking.
Does the speaker require a backbox?
No, the Control 126 WT is designed for open-back installation in standard wall cavities. However, for improved sound isolation, a separate backbox can be used.
Is this speaker suitable for outdoor use?
The Control 126 WT is intended for indoor use only. It is not weather-resistant. For outdoor applications, consider a JBL outdoor-rated model.
How do I wire the speaker?
Connect the amplifier wires to the spring-loaded terminals on the back of the speaker. Observe polarity: red (+) and black (-). Use 16-18 AWG speaker wire.
Can I use a 70V/100V distributed audio system?
Yes, this speaker includes an optional step-down transformer with multiple power taps (15W, 7.5W, 3.75W, 1.9W) for constant voltage systems. Set the tap via a rear switch.
What is the impedance of the speaker?
The nominal impedance is 8 ohms. When using the transformer, the impedance becomes higher and depends on the tap setting.
How do I clean the speaker?
Use a soft, dry cloth to gently wipe the grille and baffle. Do not use water or cleaning solvents. Vacuum the grille with a brush attachment if dusty.
Where can I find the user manual or technical specifications?
The user manual is available for download on the JBL Professional website or via the product page on notice-facile.com. It includes detailed installation and wiring instructions.
User questions about Control 126 WT JBL
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Pregnant in PDF format for free! Find your manual Control 126 WT - JBL and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Control 126 WT by JBL.