EAP706 - Access Point 4ipnet - Free user manual and instructions
Find the device manual for free EAP706 4ipnet in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wireless Access Point |
| Brand | 4ipnet |
| Model | EAP706 |
| Dimensions (W x D x H) | 200 x 200 x 35 mm |
| Weight | 500 g |
| Power Supply | PoE (802.3af) or 12V DC adapter |
| Power Consumption | 15 W (max) |
| Wireless Standards | IEEE 802.11a/b/g/n/ac Wave 2 |
| Frequency Bands | 2.4 GHz and 5 GHz |
| Maximum Data Rate | 1200 Mbps (2.4 GHz: 300 Mbps, 5 GHz: 867 Mbps) |
| Antennas | 4 internal omnidirectional antennas |
| Ethernet Ports | 1 x Gigabit Ethernet (PoE IN) |
| Management | Web GUI, SNMP, CLI, Cloud management |
| Security | WPA/WPA2/WPA3, 802.1X, MAC filter, Rogue AP detection |
| Mounting | Ceiling or wall mount (bracket included) |
| Operating Temperature | 0°C to 50°C |
| Operating Humidity | 10% to 90% (non-condensing) |
| Certifications | FCC, CE, RoHS |
| Maintenance | Clean with a soft, dry cloth; avoid liquids |
| Repairability | No user-serviceable parts; contact support for issues |
| Included Accessories | Mounting bracket, screws, quick start guide |
Frequently Asked Questions - EAP706 4ipnet
How do I reset the 4ipnet EAP706 to factory defaults?
Press and hold the reset button on the device for about 10 seconds until the LED blinks rapidly. The access point will reboot with factory settings.
What is the default IP address to access the web interface?
The default IP address is 192.168.1.100. Make sure your computer is on the same subnet.
Can I power the EAP706 via PoE?
Yes, the EAP706 supports Power over Ethernet (802.3af). You can use a PoE switch or injector.
How many users can the EAP706 support?
The EAP706 is designed for up to 150 simultaneous users under typical conditions. Actual capacity depends on traffic.
Does the EAP706 support mesh networking?
Yes, it supports mesh configuration via the 4ipnet controller or cloud, allowing seamless coverage expansion.
What security protocols are supported?
The device supports WPA/WPA2/WPA3, 802.1X, MAC address filtering, and rogue AP detection.
How do I update the firmware?
Download the latest firmware from the 4ipnet support site. Log into the web interface, go to Management > Firmware Upgrade, and upload the file.
Can the EAP706 be mounted on a wall?
Yes, it includes a mounting bracket for ceiling or wall installation. Secure the bracket first and attach the AP.
What is the operating temperature range?
The EAP706 operates reliably from 0°C to 50°C (32°F to 122°F).
Where can I download the user manual?
The manual can be downloaded for free from notice-facile.com or the 4ipnet official website in PDF format.
User questions about EAP706 4ipnet
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Access Point in PDF format for free! Find your manual EAP706 - 4ipnet and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. EAP706 by 4ipnet.