NP-MC382W - Video projector NEC - Free user manual and instructions
Find the device manual for free NP-MC382W NEC in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Video Projector |
| Brand | NEC |
| Model | NP-MC382W |
| Projection Method | DLP |
| Brightness (ANSI Lumens) | 3200 |
| Native Resolution | WXGA (1280 x 800) |
| Contrast Ratio | 15000:1 |
| Aspect Ratio | 16:10 |
| Lens Zoom | 1.3x Manual |
| Keystone Correction | Auto & Manual (±30° Vertical) |
| Inputs | HDMI, VGA, Composite, Audio 3.5mm |
| Built-in Speaker | 16W Mono |
| Lamp Life | Up to 6000 hours (Standard), 10000 hours (Eco) |
| Power Consumption | 255W (Standard), <1W (Standby) |
| Dimensions (W x D x H) | 345 x 261 x 95 mm |
| Weight | 2.8 kg |
| Fan Noise | 32 dB (Standard), 26 dB (Eco) |
| Remote Control | Included (IR) |
| Safety Features | Kensington Lock, Password Protection |
| Repairability | Lamp and filter user-replaceable |
Frequently Asked Questions - NP-MC382W NEC
How to connect a laptop to the NEC NP-MC382W projector?
Use an HDMI or VGA cable to connect the laptop to the corresponding input port on the projector. Then select the correct input source using the Source button on the remote or projector.
What is the lamp life of the NP-MC382W?
The lamp lasts up to 6000 hours in standard mode and up to 10,000 hours in eco mode. The projector displays lamp hours in the menu.
How to adjust keystone correction?
Press the Keystone button on the remote or access the menu under Settings > Keystone. Use the arrow keys to correct vertical distortion.
Can I mount the projector on a ceiling?
Yes, the NP-MC382W supports ceiling mounting. Use a compatible mount and ensure to invert the image in the menu (Settings > Projection Mode > Ceiling Mount).
How to clean the projector filter?
Turn off and unplug the projector. Locate the air filter on the side, remove it, and gently clean with a vacuum or soft brush. Reinstall and reset the filter timer in the menu.
What should I do if the projector overheats?
Ensure proper ventilation and clean the air filter. If the problem persists, check that the eco mode is enabled to reduce heat output. The projector will shut down automatically if overheating occurs.
How to replace the lamp?
Turn off and unplug the projector, let it cool. Open the lamp cover on the bottom, unscrew the old lamp, and insert a new NEC NP39LP or compatible lamp. Reset the lamp timer in the menu.
Does the projector support 3D content?
Yes, the NP-MC382W supports DLP Link 3D for active shutter glasses. Enable 3D mode in the menu and connect a compatible 3D source.
What is the throw distance for a 100-inch screen?
With a 1.3x zoom, the throw distance for a 100-inch diagonal screen ranges from approximately 2.5 to 3.3 meters (depending on zoom setting). Use the NEC projector calculator for precise values.
How to reset the projector to factory settings?
Go to the Settings menu, select Factory Reset, and confirm. This restores all settings except lamp hours and language.
User questions about NP-MC382W NEC
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Video projector in PDF format for free! Find your manual NP-MC382W - NEC and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. NP-MC382W by NEC.