E618 - Security Camera ACTi - Free user manual and instructions
Find the device manual for free E618 ACTi in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | IP Security Camera |
| Model | E618 |
| Brand | ACTi |
| Image Sensor | 1/2.8” Progressive CMOS |
| Resolution | 1920 x 1080 (Full HD) at 30 fps |
| Lens | 2.8mm fixed lens, F1.8 |
| Field of View | Horizontal: 102°, Vertical: 56° |
| Day/Night | Mechanical IR-cut filter, built-in IR LEDs up to 30m |
| Power Supply | DC 12V or PoE (802.3af) |
| Power Consumption | Max 6W (IR on) |
| Dimensions (H x Ø) | 110 mm x 130 mm |
| Weight | Approx. 400 g (without bracket) |
| Operating Temperature | -10°C to 50°C (14°F to 122°F) |
| Storage Temperature | -20°C to 60°C (-4°F to 140°F) |
| Humidity | 0% to 90% (non-condensing) |
| Protection Rating | IP67 (weatherproof) |
| Video Compression | H.264, H.265, MJPEG |
| Audio | 1-channel audio input, built-in microphone |
| Alarm I/O | 1 input, 1 output |
| Network Interface | 10/100 Base-T Ethernet (RJ-45) |
| Supported Protocols | IPv4, IPv6, TCP, UDP, HTTP, RTSP, RTP, ONVIF |
| Mounting | Wall or ceiling mount (bracket included) |
| Maintenance | Clean lens with soft dry cloth; avoid solvents |
| Spare Parts | Optional: mounting bracket, power adapter, PoE injector |
Frequently Asked Questions - E618 ACTi
How do I reset the ACTi E618 camera to factory defaults?
To reset the ACTi E618 camera, locate the reset button (usually a small pinhole) on the camera body. Press and hold it for about 10 seconds using a paperclip while the camera is powered on. The camera will reboot with factory settings.
What is the default IP address and login for the E618?
The default IP address is 192.168.0.100. The default username is admin and the password is 123456. It is recommended to change the password after first login.
Can the ACTi E618 be used outdoors?
Yes, the ACTi E618 has an IP67 rating, making it suitable for outdoor use. It is weatherproof and can withstand rain, dust, and extreme temperatures.
How do I connect the camera to my network?
You can connect the ACTi E618 via Power over Ethernet (PoE) or a standard 12V DC power adapter. Simply plug an Ethernet cable from the camera to your PoE switch (or use a PoE injector) and the camera will obtain an IP address via DHCP.
Does the E618 support night vision?
Yes, the ACTi E618 features built-in IR LEDs with a range of up to 30 meters (98 feet). It automatically switches to black-and-white mode in low light conditions.
What software is compatible with the ACTi E618?
The camera supports ONVIF Profile S, making it compatible with many third-party VMS software like Blue Iris, Milestone, and Synology Surveillance Station. ACTi also provides its own management software.
How do I clean the lens of the ACTi E618?
Use a soft, dry microfiber cloth to gently wipe the lens. Do not use any harsh chemicals or abrasive materials as they may scratch the lens coating.
What is the field of view of the E618?
The ACTi E618 has a fixed 2.8mm lens with a horizontal field of view of approximately 102 degrees and a vertical field of view of 56 degrees.
Can I use a PoE injector with the E618?
Yes, you can use a standard PoE injector (802.3af) to power the camera. Ensure the injector provides at least 6W of power to support the IR LEDs.
How do I update the firmware on the ACTi E618?
Download the latest firmware from the ACTi website. Access the camera's web interface, go to System > Maintenance, upload the firmware file, and follow the on-screen prompts. Do not power off during the update.
User questions about E618 ACTi
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Security Camera in PDF format for free! Find your manual E618 - ACTi and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. E618 by ACTi.