CPF190i - Gps Standard Horizon - Free user manual and instructions
Find the device manual for free CPF190i Standard Horizon in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | GPS Chart Plotter / Fishfinder |
| Brand | Standard Horizon |
| Model | CPF190i |
| Display Size | 5 inches (diagonal) color TFT |
| Resolution | 480 x 272 pixels |
| Dimensions (W x H x D) | 7.5 x 4.5 x 2.5 inches (191 x 114 x 64 mm) |
| Weight | 1.5 lbs (0.68 kg) |
| Power Supply | 12 V DC (10-16 V range) |
| Power Consumption | 6 W typical |
| GPS Receiver | 32-channel WAAS/EGNOS/MSAS |
| Antenna | Internal (external option) |
| Waterproof Rating | IPX7 (submersible up to 1 m for 30 min) |
| Waypoints/ Routes/ Tracks | 3000 waypoints, 100 routes, 20 track logs |
| Mapping | Built-in worldwide base map, optional C-MAP cartography |
| Fishfinder Sonar | 200 kHz, 300 W RMS (600 W peak) |
| Depth Range | Up to 1,500 ft (457 m) |
| Interface Ports | NMEA 0183, NMEA 2000, microSD card slot |
| Operating Temperature | -15°C to 55°C (5°F to 131°F) |
| Maintenance & Cleaning | Clean with a soft, damp cloth; avoid solvents |
| Safety Notices | Use only as a navigation aid; do not rely solely on electronics |
| Spare Parts & Repairability | Contact Standard Horizon authorized service centers; limited user-serviceable parts |
Frequently Asked Questions - CPF190i Standard Horizon
How do I install the CPF190i on my boat?
Mount the device using the included bracket or flush mount kit. Connect the power cable to a 12V DC source with an inline fuse. For the transducer, follow the instructions for through-hull or transom mounting. Ensure the GPS antenna has a clear view of the sky.
Can I update the charts on the CPF190i?
Yes, you can update charts via a microSD card. Purchase updated C-MAP cartridges from authorized dealers and insert the card into the slot on the front of the unit.
What type of transducer is compatible?
The CPF190i works with 200 kHz transducers. Standard Horizon offers specific models like the ST-40. Ensure the transducer is connected to the dedicated sonar port.
How do I reset the device to factory settings?
Press and hold the PWR and MENU keys simultaneously for 10 seconds while power is on. The unit will reset to defaults. Note that this erases all user data.
Is the CPF190i waterproof?
Yes, it meets IPX7 standards, meaning it can be submerged in 1 meter of water for up to 30 minutes. However, avoid prolonged exposure.
How do I clean the screen?
Use a soft, lint-free cloth slightly dampened with fresh water. Do not use harsh chemicals or abrasive materials, as they may damage the anti-glare coating.
Can I connect the CPF190i to other marine electronics?
Yes, it supports NMEA 0183 and NMEA 2000 networks for data sharing with autopilots, radios, and instruments. Use compatible cables and connectors.
What does the 'i' in CPF190i stand for?
The 'i' indicates an integrated fishfinder with built-in sonar capabilities, as opposed to the CPF190 model which is a chart plotter only.
How do I mark a waypoint?
Press the WPT key while on the chart screen to place a waypoint at the cursor position. You can name and edit waypoints in the waypoint list.
What should I do if the device freezes?
Perform a soft reset by pressing and holding the PWR key for 5 seconds to turn it off, then restart. If the issue persists, try a factory reset or contact Standard Horizon support.
User questions about CPF190i Standard Horizon
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Gps in PDF format for free! Find your manual CPF190i - Standard Horizon and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CPF190i by Standard Horizon.