DS-2CE16H5T-IT3ZE - Security Camera Hikvision - Free user manual and instructions
Find the device manual for free DS-2CE16H5T-IT3ZE Hikvision in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Security Camera |
| Brand | Hikvision |
| Model | DS-2CE16H5T-IT3ZE |
| Category | TurboHD Camera |
| Sensor Type | 2 MP CMOS |
| Resolution | 1920 × 1080 (1080p) |
| Lens Type | Varifocal, 2.8 – 12 mm |
| Field of View | 98° – 30° (horizontal) |
| IR Distance | Up to 50 m (EXIR 2.0) |
| Day/Night | ICR auto-switching |
| Weatherproof Rating | IP67 |
| Power Supply | 12 V DC ± 25% |
| Power Consumption | Max 6 W |
| Dimensions (Camera) | Φ 70 × 155 mm |
| Weight (Camera) | Approx. 650 g |
| Video Output | 1 BNC (HD-TVI / AHD / CVI / CVBS) |
| Operating Temperature | -40 °C to +60 °C |
| Cleaning Instruction | Gently wipe lens with a soft, dry cloth; avoid solvents |
| Safety Warning | Use only approved 12V DC power adapter; disconnect before maintenance |
| Spare Parts / Repairability | Replaceable cable, bracket; contact Hikvision for service |
Frequently Asked Questions - DS-2CE16H5T-IT3ZE Hikvision
How do I reset the Hikvision DS-2CE16H5T-IT3ZE camera to factory defaults?
To reset, press and hold the reset button (located inside the camera housing) for 10 seconds while the camera is powered on. Release, and the camera will reboot with factory settings.
What type of cable is required for video output?
The camera uses a BNC connector for video output. It supports HD-TVI, AHD, CVI, and CVBS signals. Use a compatible coaxial cable (e.g., RG59) for distances up to 300 meters.
Can I use this camera outdoors?
Yes, the camera has an IP67 weatherproof rating, making it suitable for outdoor use. Ensure all connections are properly sealed to prevent moisture ingress.
How far can the IR LEDs see at night?
The camera features EXIR 2.0 technology with an IR range of up to 50 meters. Actual performance may vary based on environmental conditions.
What power adapter should I use?
Use a 12V DC power adapter with a current rating of at least 500 mA (1 A recommended). Hikvision recommends using a regulated power supply to avoid damage.
How do I clean the camera lens?
Gently wipe the lens with a soft, dry microfiber cloth. Avoid using alcohol or abrasive cleaners. For stubborn dirt, slightly dampen the cloth with water.
What is the field of view of the varifocal lens?
The lens has a horizontal field of view ranging from 98° (at 2.8 mm) to 30° (at 12 mm). Adjust the zoom by turning the lens ring.
Can I adjust the camera angle after installation?
Yes, the camera is mounted on a 3-axis bracket allowing pan, tilt, and rotation adjustments. Loosen the screws, position the camera, and tighten them securely.
What if the image is blurry?
First, ensure the lens focus is adjusted correctly by turning the focus ring on the lens. Also, clean the lens and check if the protective film has been removed.
Is this camera compatible with DVRs?
Yes, it works with HD-TVI DVRs as well as some AHD, CVI, and CVBS DVRs. Check your DVR's compatibility with 1080p input before purchasing.
User questions about DS-2CE16H5T-IT3ZE Hikvision
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Security Camera in PDF format for free! Find your manual DS-2CE16H5T-IT3ZE - Hikvision and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DS-2CE16H5T-IT3ZE by Hikvision.