Stones & Ceramics - Laminate flooring Armstrong - Free user manual and instructions
Find the device manual for free Stones & Ceramics Armstrong in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Armstrong |
| Model | Stones & Ceramics |
| Product Type | Laminate Flooring |
| Plank Dimensions (approx.) | 1.2 m x 0.2 m (4 ft x 0.66 ft) |
| Plank Thickness | 8 mm (5/16 in) |
| Pack Coverage | 2.4 m² (25.8 ft²) |
| Pack Weight | 20 kg (44 lb) |
| Installation Method | Floating (click-lock) |
| Wear Layer Thickness (AC Rating) | AC3 (class 32) |
| Water Resistance | Not waterproof; wipe spills immediately |
| Scratch Resistance | High (due to melamine overlay) |
| Underfloor Heating Compatible | Yes (max 27°C / 80°F) |
| Surface Texture | Embossed (stone/ceramic look) |
| Edge Profile | 4-sided bevel |
| Recommended Use | Residential and light commercial |
| Maintenance | Dry mop or damp mop with approved cleaner |
| Warranty | 25 years limited residential |
| Country of Origin | Germany (estimated) |
| Environmental Certification | FloorScore (for low emissions) |
Frequently Asked Questions - Stones & Ceramics Armstrong
How do I install Armstrong Stones & Ceramics laminate flooring?
Install as a floating floor using the click-lock system. Ensure the subfloor is clean, dry, and level. Leave a 10 mm expansion gap around walls and use spacers. Click planks together at a 30° angle and drop down.
Can I install this flooring over underfloor heating?
Yes, but the surface temperature must not exceed 27°C (80°F). Use a suitable underlay and gradually increase heating over several days.
How do I clean and maintain this laminate floor?
Sweep or vacuum regularly with a soft brush. Damp mop using a laminate floor cleaner diluted with water. Never use wet mop, steam mop, or wax.
Is the flooring waterproof?
No, it is moisture-resistant but not waterproof. Wipe up spills immediately to prevent swelling. Avoid standing water for extended periods.
What underlay should I use?
Use a 2-3 mm foam underlay with a vapor barrier (if on concrete). For optimal sound reduction, choose a thicker underlay (up to 5 mm). Ensure it is compatible with laminate and underfloor heating if applicable.
How do I repair a scratch in the flooring?
For light scratches, use a laminate touch-up marker matching the color. For deep scratches, replace the damaged plank by disassembling the floor from the nearest edge.
What is the recommended acclimation time?
Acclimate the planks in the room where they will be installed for at least 48 hours. Keep the sealed boxes stacked horizontally, off the ground, with the room temperature between 18-24°C (65-75°F).
Can I install this in a bathroom or kitchen?
Avoid high moisture areas like bathrooms and laundry rooms. For kitchens, use in low-spill zones and wipe spills immediately. Consider using transition strips near wet areas.
What tools are needed for installation?
You need a jigsaw or laminate cutter, tapping block, pull bar, spacers, measuring tape, pencil, and safety glasses. A knee pad and dust mask are optional.
How do I replace a damaged plank in the middle of the floor?
Cut out the damaged plank using a circular saw with a depth of plank thickness. Remove the pieces and clean the groove. Glue a replacement plank's tongue and groove, then tap it into place and wipe excess glue.
User questions about Stones & Ceramics Armstrong
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Laminate flooring in PDF format for free! Find your manual Stones & Ceramics - Armstrong and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Stones & Ceramics by Armstrong.