QIT300 - Monitor Stiefel - Free user manual and instructions
Find the device manual for free QIT300 Stiefel in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Patient Monitor |
| Brand | Stiefel |
| Model | QIT300 |
| Display | 12.1-inch color TFT LCD |
| Dimensions (W x H x D) | 310 mm x 260 mm x 150 mm |
| Weight | 4.5 kg (with battery and accessories) |
| Power Supply | AC 100-240 V, 50/60 Hz; Internal rechargeable battery (4600 mAh) |
| Battery Operating Time | Approximately 4 hours |
| Parameters Monitored | ECG, Heart Rate, SpO2, NIBP, Respiration, Temperature |
| Alarms | Visual and audible alarms for parameter limits, arrhythmia, leads off |
| Data Storage | Up to 72 hours of trend data, 1200 alarm events, 24 hours of waveform |
| Connectivity | RS-232, USB, Ethernet (optional Wi-Fi) |
| Display Resolution | 800 x 600 pixels |
| Touchscreen | Resistive touchscreen |
| Protection Rating | IP22 |
| Operating Temperature | 5°C to 40°C |
| Humidity | 15% to 95% (non-condensing) |
| Cleaning | Wipe with a soft cloth dampened with mild soap and water; do not use abrasive cleaners |
| Safety Standards | IEC 60601-1, IEC 60601-2-27, IEC 60601-2-49 |
| Spare Parts | ECG cables, SpO2 sensors, NIBP cuffs, temperature probes, batteries, fuses available |
| Repairability | Serviceable by authorized technicians; replaceable modules and batteries |
Frequently Asked Questions - QIT300 Stiefel
How do I power on the QIT300 monitor?
Press the power button located on the front panel. The monitor will boot up and display the main screen. If using battery, ensure it is charged.
How do I clean the monitor?
Turn off the monitor and disconnect from power. Use a soft cloth dampened with mild soap and water. Do not use abrasive or alcohol-based cleaners. Avoid getting liquid into openings.
How do I replace the battery?
Turn off the monitor and disconnect AC power. Open the battery compartment on the rear panel. Remove the old battery and insert the new one, ensuring correct polarity. Close the compartment.
What parameters can the QIT300 monitor?
The QIT300 monitors ECG (3/5-lead), heart rate, SpO2, non-invasive blood pressure (NIBP), respiration rate, and temperature. Optional CO2 and cardiac output modules may be available.
How do I set alarms?
Press the 'Alarm' button on the front panel or access alarm settings via the touchscreen menu. Adjust high/low limits for each parameter. Alarms can be temporarily silenced.
Can I connect the monitor to a network?
Yes, the QIT300 has Ethernet and optional Wi-Fi connectivity. Configure network settings in the system menu. This allows data transfer to central monitoring systems.
What should I do if the monitor displays 'Leads Off'?
Check the ECG cable connections. Ensure electrodes are properly attached to the patient and that the cable is securely connected to the monitor. Replace electrodes if necessary.
How do I export trend data?
Insert a USB drive into the USB port. From the main menu, select 'Data Export' and choose the desired data (trends, alarms, waveforms). The data will be saved in a CSV or PDF format.
Is the monitor safe for MRI use?
No, the QIT300 is not MRI compatible. It contains ferromagnetic materials that can be affected by strong magnetic fields. Do not bring it into the MRI room.
Where can I find spare parts or accessories?
Contact Stiefel customer service or your authorized distributor. Common spare parts include ECG cables, SpO2 sensors, NIBP cuffs, temperature probes, batteries, and fuses.
User questions about QIT300 Stiefel
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Monitor in PDF format for free! Find your manual QIT300 - Stiefel and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. QIT300 by Stiefel.