TAP-R2 - Router Amped Wireless - Free user manual and instructions
Find the device manual for free TAP-R2 Amped Wireless in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wireless Router |
| Model | TAP-R2 |
| Brand | Amped Wireless |
| Dimensions (L x W x H) | 9.5 x 6.5 x 1.5 inches |
| Weight | 1.2 lbs |
| Power Supply | 12V DC, 2A |
| Wireless Standards | IEEE 802.11ac/n/g/b/a |
| Frequency Bands | 2.4 GHz and 5 GHz |
| Maximum Data Rate | 1900 Mbps |
| Number of Antennas | 4 external high-gain antennas |
| Ethernet Ports | 4 Gigabit LAN, 1 Gigabit WAN |
| USB Ports | 1 USB 2.0 |
| Security | WPA2-PSK, WPA, firewall, VPN passthrough |
| Management | Web-based GUI, mobile app |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
| Humidity | 10% to 90% non-condensing |
| Cleaning Instructions | Unplug and wipe with a dry cloth |
| Safety Precautions | Keep ventilated; avoid liquids |
| Spare Parts Available | Power adapter, antennas |
| Repairability | Not user-serviceable; contact support |
Frequently Asked Questions - TAP-R2 Amped Wireless
How do I set up the Amped Wireless TAP-R2 router?
Connect the router to your modem via the WAN port, power it on, and access the web interface at 192.168.1.1. Follow the setup wizard to configure your wireless network.
What is the default username and password?
The default username is admin and the default password is password. It is recommended to change these during initial setup.
How do I reset the TAP-R2 to factory defaults?
Press and hold the Reset button on the back of the router for about 10 seconds using a paperclip until the LED indicators flash.
What wireless range can I expect from the TAP-R2?
With its high-gain antennas, the TAP-R2 can cover up to 10,000 sq ft under optimal conditions, but actual range may vary due to obstacles.
Can I use the TAP-R2 as a range extender?
Yes, the TAP-R2 supports repeater mode. Access the web interface and switch to 'Repeater' mode under wireless settings.
How do I update the firmware on my TAP-R2?
Download the latest firmware from the Amped Wireless support page. Log into the router interface, go to Administration > Firmware Upgrade, and upload the file.
What should I do if I forget my wireless password?
Connect a computer via Ethernet cable to the router, log into the web interface, and view or change the wireless password under Wireless Settings.
Is the TAP-R2 compatible with VPN services?
Yes, the router supports VPN passthrough for PPTP, L2TP, and IPSec. You can configure client VPN on some firmware versions.
How do I enable parental controls?
Log into the router interface, go to Access Control or Parental Controls, and set restrictions by device MAC address or schedule.
The router's LED lights are not turning on. What could be wrong?
Check the power adapter connection and try a different outlet. If still off, the router may be faulty; contact Amped Wireless support for assistance.
User questions about TAP-R2 Amped Wireless
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Router in PDF format for free! Find your manual TAP-R2 - Amped Wireless and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TAP-R2 by Amped Wireless.