CM6TSMF - Pregnant APART - Free user manual and instructions
Find the device manual for free CM6TSMF APART in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Ceiling Speaker |
| Brand | APart |
| Model | CM6TSMF |
| Driver Size | 6.5 inches |
| Power Handling (RMS) | 30 W |
| Power Handling (Program) | 60 W |
| Impedance (Low Impedance) | 8 Ω |
| Transformer Taps (100V) | 30 W / 15 W / 7.5 W / 3.75 W |
| Frequency Response | 80 Hz - 20 kHz |
| Sensitivity (1W/1m) | 90 dB |
| Maximum SPL | 105 dB |
| Dispersion Angle (Conical) | 90° |
| Dimensions (Diameter x Depth) | 255 mm x 120 mm |
| Cut-out Hole Size | 225 mm |
| Weight | 2.5 kg |
| Grille Material | Steel, white powder coated |
| Protection Rating | IP54 |
| Included Accessories | Cut-out template, mounting screws, paint shield |
| Application | Background music and paging systems |
| Compliance | CE, RoHS |
Frequently Asked Questions - CM6TSMF APART
What is the recommended amplifier power for the CM6TSMF?
For low impedance operation, use an amplifier rated between 30W and 60W RMS at 8Ω. For 100V line systems, select the appropriate tap (30W, 15W, 7.5W, or 3.75W) based on your system design.
How do I install the speaker into a ceiling?
Cut a hole of 225mm diameter using the provided template. Route the speaker cable through the ceiling, connect to the terminal block (observing polarity), then insert the speaker and tighten the clamping screws to secure it.
Can this speaker be used outdoors?
The CM6TSMF has an IP54 rating, meaning it is protected against dust and water splashes. It can be used in covered outdoor areas, but not in direct rain or high moisture environments.
What type of cable should I use?
Use a two-conductor speaker cable of appropriate gauge. For 100V lines, a 1.5mm² (AWG 16) cable is sufficient for most runs. For low impedance, use 2.5mm² (AWG 14) for longer distances.
How do I select the correct tap on the transformer?
Choose the tap that matches the desired power and the amplifier's total load. Sum the tap powers of all speakers on the same line; the total must not exceed the amplifier's rated output. Common taps are 30W, 15W, 7.5W, and 3.75W.
Does the speaker come with a back can?
No, the CM6TSMF is a open-back ceiling speaker designed for use in plenum spaces. If fire rating is required, an optional back box (APart model BBC6) can be purchased separately.
What is the frequency response and is it suitable for music?
The frequency response is 80Hz to 20kHz, making it suitable for background music and speech. For deeper bass, consider adding a subwoofer.
Can I paint the grille to match my ceiling?
Yes, the grille is paintable. Remove the grille before painting. Use water-based paints and avoid clogging the perforations. A paint shield is included to protect the driver during installation.
Is the speaker compatible with 70V systems?
Yes, the transformer is designed for 100V systems, but it can be used on 70V lines. In that case, the power taps will be approximately half (e.g., 30W becomes about 15W at 70V). Check the exact values in the manual.
How do I clean and maintain the speaker?
Wipe the grille and surround with a dry or slightly damp cloth. Do not use solvents or abrasive cleaners. Ensure the grille is secure to prevent dust ingress. Periodically check connections for corrosion.
User questions about CM6TSMF APART
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Pregnant in PDF format for free! Find your manual CM6TSMF - APART and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CM6TSMF by APART.