DPX130 - Uncategorized CISCO - Free user manual and instructions
Find the device manual for free DPX130 CISCO in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Cable Modem |
| Brand | Cisco |
| Model | DPX130 |
| Dimensions (L x W x H) | 5.5 x 3.5 x 1.5 inches (140 x 89 x 38 mm) |
| Weight | 0.5 lb (227 g) |
| Power Supply | 12V DC, 1A |
| Power Consumption | 12W max |
| Standards | DOCSIS 2.0, EuroDOCSIS 2.0 |
| Ethernet Interface | 1 x 10/100Base-T Ethernet (RJ45) |
| USB Interface | 1 x USB 1.1 (Type B) |
| Frequency Range | 88-860 MHz (downstream), 5-65 MHz (upstream) |
| Downstream Data Rate | Up to 38 Mbps |
| Upstream Data Rate | Up to 27 Mbps |
| LED Indicators | Power, DS, US, Online, Link |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
| Storage Temperature | -4°F to 140°F (-20°C to 60°C) |
| Humidity | 5% to 95% non-condensing |
| Safety Certifications | FCC, UL, CE |
| Maintenance | Keep clean with dry cloth; avoid liquids |
| Repair | Not user-serviceable; contact ISP for support |
Frequently Asked Questions - DPX130 CISCO
How do I reset the Cisco DPX130 cable modem?
To reset the Cisco DPX130, locate the reset button on the back panel. Use a paperclip to press and hold it for 10 seconds until the lights flash. This restores factory defaults.
What do the LED lights mean?
The LEDs indicate: Power (solid when on), DS (downstream sync), US (upstream sync), Online (internet connection), and Link (Ethernet activity). Refer to manual for detailed patterns.
How to connect the modem to the internet?
Connect the coaxial cable from your wall outlet to the modem's RF connector. Then connect an Ethernet cable from the modem's Ethernet port to your computer. Plug in the power adapter and wait for the Online LED to turn solid.
Why is the modem not syncing?
Check that the coaxial cable is tightly connected. Ensure your cable service is active. If DS or US LEDs are blinking, the modem is searching for signal. Try a reset or contact your ISP for signal issues.
How to update firmware?
Firmware updates are pushed automatically by your ISP via the cable signal. You cannot manually update it. If you experience issues, power cycle the modem to trigger a re-download.
Can I use the DPX130 with any cable provider?
The Cisco DPX130 is compatible with major cable providers that support DOCSIS 2.0. However, some providers may require specific provisioning. Check with your ISP for compatibility.
What to do if the modem has no power?
Verify the power adapter is securely plugged into the modem and a working electrical outlet. Try a different outlet. If the Power LED remains off, the adapter or modem may be faulty. Contact your ISP for replacement.
How to access the modem's web interface?
Open a web browser and go to 192.168.100.1 (default). You may need to be connected directly via Ethernet. The interface shows status, logs, and configuration options.
Is the DPX130 compatible with DOCSIS 3.0?
No, the DPX130 is a DOCSIS 2.0 modem. It does not support DOCSIS 3.0 bonding or higher speeds. For faster internet, consider a DOCSIS 3.0 or 3.1 modem.
Where is the serial number located?
The serial number is printed on a label on the bottom or back of the modem. It is also visible in the web interface under Device Info. Keep it for registration or support.
User questions about DPX130 CISCO
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual DPX130 - CISCO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DPX130 by CISCO.