FTL410QE2N - Carte réseau/Adaptateur Finisar - Free user manual and instructions
Find the device manual for free FTL410QE2N Finisar in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Network adapter |
| Brand | Finisar |
| Model | FTL410QE2N |
| Form Factor | PCI Express (standard profile) |
| Ports | 1 x SFP+ (10GbE) |
| Data Rate | 10 Gbps |
| Dimensions (L x W x H) | 167.64 mm x 68.9 mm x 20 mm |
| Weight | 200 g |
| Power Consumption | < 15 W |
| Operating Temperature | 0 °C to 70 °C |
| Storage Temperature | -40 °C to 85 °C |
| Compliance Standards | IEEE 802.3ae (10GBASE-LR), PCI Express Gen 2.0 |
| Cable Type | Single-mode fiber (with SFP+ module) |
| Maximum Distance | 10 km (with 10GBASE-LR module) |
| Maintenance | Keep connectors clean, avoid dust, no liquid cleaning. |
| Safety Precautions | ESD sensitive, use grounded wrist strap, avoid laser radiation. |
| Spare Parts Availability | Not user-serviceable; replace entire unit. |
| Environmental Protection | RoHS compliant |
Frequently Asked Questions - FTL410QE2N Finisar
What is the Finisar FTL410QE2N?
The Finisar FTL410QE2N is a 10 Gigabit Ethernet network adapter (PCI Express) with an SFP+ port for optical fiber connectivity.
What type of SFP+ module does it support?
It supports standard SFP+ transceivers, including 10GBASE-LR (long reach) for distances up to 10 km over single-mode fiber.
Is this card compatible with my computer?
It requires a free PCI Express x8 or x16 slot and a 64-bit operating system (Windows, Linux, etc.). Check your motherboard for compatibility.
How do I install the driver?
Drivers are usually included with the adapter or available from Finisar's website. For Windows, the driver may be recognized automatically. For Linux, it often uses the ixgbe kernel module.
Why is the link LED not lighting up?
Ensure the SFP+ module is fully inserted, the fiber cable is properly connected, and the other end device is powered on and configured for 10GbE. Check for dirty connectors.
Can I use a DAC (Direct Attach Copper) cable with this adapter?
Yes, it supports passive and active SFP+ DAC cables for short distances (up to 7 meters) without optical transceivers.
What is the power consumption of this card?
Typical power consumption is under 15 W, depending on the SFP+ module used.
Does it support jumbo frames?
Yes, it supports jumbo frames up to 9000 bytes (MTU 9000) for improved performance in data-intensive applications.
How do I clean the fiber optic connector?
Use a lint-free cleaning swab or a specialized fiber optic cleaning pen. Never use liquids or compressed air directly on the connector.
Is there a warranty for this product?
Finisar typically provides a limited lifetime warranty. Check your purchase documentation for specific terms and conditions.
User questions about FTL410QE2N Finisar
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Carte réseau/Adaptateur in PDF format for free! Find your manual FTL410QE2N - Finisar and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FTL410QE2N by Finisar.