P0270 - Measurement P3 International - Free user manual and instructions
Find the device manual for free P0270 P3 International in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Power Monitor |
| Brand | P3 International |
| Model | P0270 |
| Category | Measurement |
| Dimensions | 5.5 x 3.5 x 2.0 inches |
| Weight | 0.5 lbs |
| Power Supply | 120 V AC, 60 Hz |
| Display | LCD, 4-digit |
| Voltage Range | 115-125 V AC |
| Current Range | 0.01 - 15 A |
| Power Range | 0.5 - 1875 W |
| Frequency Range | 60 Hz |
| Functions | Volts, Amps, Watts, VA, PF, Frequency, Cost, kWh |
| Measurement Accuracy | ±1% for power, ±0.5% for voltage/current |
| Overload Protection | Fuse, 15 A |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
| Humidity Range | 0% to 80% non-condensing |
| Material | ABS Plastic |
| Maintenance | Wipe with a dry, soft cloth. Do not use solvents. |
| Safety | Use in dry indoor locations only. Keep away from water. |
| Spare Parts | Not applicable; device is not user-serviceable. |
| Repairability | Not designed for repair. Contact manufacturer for issues. |
| General Information | Used for monitoring energy consumption of household appliances. |
Frequently Asked Questions - P0270 P3 International
What does the P3 P0270 measure?
The P3 P0270 measures voltage, current, power (watts), apparent power (VA), power factor, frequency, and cumulative energy (kWh).
How do I reset the cost or kWh readings?
To reset, press and hold the SET button for 3 seconds until the display flashes, then release. Use the UP/DOWN buttons to adjust if needed, then press SET to confirm.
Can I use the P0270 with 240V appliances?
No, the P0270 is designed for 120V AC (115-125V) only. Using it with 240V may damage the device and pose a safety risk.
What is the maximum current rating?
The maximum current is 15 amps. Exceeding this may blow the internal fuse or cause damage.
How do I set the cost per kWh?
Press the COST button to enter cost programming mode. Use UP/DOWN to set the rate (in cents per kWh), then press COST again to save.
Why does the display show 'LO' or 'Err'?
'LO' indicates low voltage or no load. 'Err' may appear if the current or power exceeds the measuring range. Check the appliance rating and reduce load if needed.
Can I leave the P0270 plugged in continuously?
Yes, it is designed for continuous monitoring. However, ensure it is not overloaded and is in a well-ventilated area.
Does the P0270 have a backup battery?
No, the device does not have a backup battery. Settings and cumulative readings are lost when unplugged.
How accurate is the P0270?
The accuracy is typically ±1% for power and ±0.5% for voltage and current under normal operating conditions.
What is the difference between Watts and VA?
Watts (real power) measure actual energy used, while VA (apparent power) is the product of voltage and current. The ratio (PF = W/VA) indicates power factor; a low PF means inefficient usage.
User questions about P0270 P3 International
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Measurement in PDF format for free! Find your manual P0270 - P3 International and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. P0270 by P3 International.
