Diver SEL03001D0 - Watch ORIENT - Free user manual and instructions
Find the device manual for free Diver SEL03001D0 ORIENT in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | ORIENT |
| Model | Diver SEL03001D0 |
| Product Type | Automatic Diver Watch |
| Movement | Automatic (self-winding) with manual winding capability |
| Caliber | Caliber Epson or Orient in-house |
| Power Reserve | Approximately 40 hours |
| Water Resistance | 200 meters (20 ATM) |
| Case Material | Stainless steel |
| Crystal | Mineral crystal |
| Case Diameter | Approximately 43.5 mm |
| Case Thickness | Approximately 13 mm |
| Strap Material | Stainless steel bracelet with diver extension |
| Weight | Approximately 200 g |
| Functions | Hour, minute, second hands; date display; unidirectional rotating bezel |
| Lume | Luminous hands and markers for low light |
| Clasp | Deployment clasp with safety lock |
| Crown | Screw-down crown |
| Caseback | Screw-in caseback |
| Dial Color | Black (typical for diver) |
| Battery | None (mechanical movement) |
| Maintenance | Recommended service every 3-5 years |
Frequently Asked Questions - Diver SEL03001D0 ORIENT
How do I wind the watch manually?
To manually wind the watch, unscrew the crown (turn it counterclockwise) until it pops out. Then turn the crown clockwise about 20-30 times. Do not overwind. Push the crown back in and screw it down tightly.
What is the water resistance rating?
The ORIENT Diver SEL03001D0 is water resistant to 200 meters (20 ATM), suitable for professional diving and high-impact water sports. Do not operate the crown under water.
How do I set the date?
Pull the crown out to the first position. Turn the crown clockwise to adjust the date. Avoid setting the date between 9 PM and 4 AM to prevent damage.
How do I use the rotating bezel?
The unidirectional bezel is used to measure elapsed time. Rotate the bezel counterclockwise to align the minute marker with the current minute. The elapsed time is read at the bezel marker.
What type of movement does it use?
It uses an automatic mechanical movement that winds itself through the motion of your wrist. It can also be manually wound.
How often should I service the watch?
ORIENT recommends servicing the watch every 3 to 5 years to maintain accuracy and water resistance. Service should be done by an authorized center.
What is the power reserve?
When fully wound, the watch has a power reserve of approximately 40 hours. If not worn for that period, it will stop.
Can I change the bracelet?
Yes, the watch has a standard 22mm lug width. You can replace the bracelet with any compatible 22mm strap.
How do I clean the watch?
Use a soft, dry cloth to wipe the case and bracelet. For deeper cleaning, use a damp cloth and mild soap. Avoid chemical cleaners. Rinse with fresh water after saltwater exposure.
Is the crystal scratch-resistant?
The watch uses mineral crystal, which is resistant to scratches but can be scratched by hard materials. It is not as hard as sapphire.
User questions about Diver SEL03001D0 ORIENT
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Watch in PDF format for free! Find your manual Diver SEL03001D0 - ORIENT and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Diver SEL03001D0 by ORIENT.