FT150 - Pressure washer FOMA - Free user manual and instructions
Find the device manual for free FT150 FOMA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Pressure Washer |
| Brand | FOMA |
| Model | FT150 |
| Power Source | Electric, 230V - 50Hz |
| Motor Type | Universal motor with fan cooling |
| Maximum Pressure | 150 bar |
| Rated Pressure | 120 bar |
| Flow Rate | 500 L/h |
| Max Water Temperature | 40°C |
| Net Weight | 12 kg |
| Dimensions (L x W x H) | 400 x 300 x 800 mm |
| Power Cable Length | 5 m |
| High-Pressure Hose Length | 8 m |
| Noise Level | 85 dB(A) at 1 m distance |
| Safety Features | Thermal cut-out, pressure relief valve, safety lock on gun |
| Functions | Adjustable pressure, detergent injection, rotating nozzle |
| Included Accessories | High-pressure gun, lance, detergent bottle, 3 nozzles (0°, 25°, 40°) |
| Repairability | Spare parts available: nozzles, hose, seals, pump kit |
| Warranty | 2 years |
Frequently Asked Questions - FT150 FOMA
How do I start the FOMA FT150 pressure washer?
Connect the high-pressure hose to the water supply and ensure the water is turned on. Plug the unit into a grounded power outlet, press the 'ON' button, and squeeze the gun trigger to release pressure. Allow the motor to run for a few seconds before use.
What type of detergent can I use with the FT150?
Use only biodegradable detergents specifically designed for pressure washers. Do not use bleach, acidic, or abrasive cleaners as they may damage the pump and seals. Follow the detergent mixing instructions on the bottle.
Why is the pressure weak or intermittent?
Check for air in the system: turn off the unit, disconnect the gun, and squeeze the trigger to release air. Ensure the water supply is adequate and the inlet filter is clean. If the issue persists, inspect the nozzle for blockage or the pump for wear.
How do I clean the nozzle?
Use the included cleaning needle to gently push out debris from the nozzle opening. Alternatively, soak the nozzle in vinegar to dissolve mineral deposits. Rinse thoroughly before reattaching.
Can I use the pressure washer with a tank or barrel?
Yes, but only with a gravity-fed water source placed at least 1 meter above the pump inlet. Do not use a tank with insufficient flow as it may damage the pump. Install a sediment filter if using rainwater.
What maintenance is required after each use?
Disconnect the water and power. Press the trigger to release residual pressure. Remove the gun and hose, drain any water from the unit. Store in a dry, frost-free place. Check the oil level in the pump (if applicable) every 10 hours.
Why does the motor run but no water comes out?
Ensure the water supply is turned on and the inlet hose is not kinked. If the unit has been stored dry, prime the pump by tilting it and running without the trigger for 15 seconds. Check the inlet filter for debris.
How do I store the FT150 for winter?
Flush the unit with antifreeze solution or run it until dry. Disconnect all hoses and store the gun and hose indoors. Protect the pump by using a winterizing kit. Remove batteries (if any) and store the unit above 0°C.
What spare parts are available for the FT150?
Common spare parts include the high-pressure hose, gun assembly, lance, nozzles, detergent bottle, seals, and pump repair kit. Contact FOMA customer service or an authorized repair center for orders.
What safety precautions should I take?
Always wear safety glasses and gloves. Never point the spray at people, pets, or electrical equipment. Keep the working area ventilated. Use the lock on the gun when not in use to prevent accidental discharge. Disconnect power before servicing.
User questions about FT150 FOMA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Pressure washer in PDF format for free! Find your manual FT150 - FOMA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FT150 by FOMA.