HubMax HB10V - Chargeur pour appareil mobile myCharge - Free user manual and instructions
Find the device manual for free HubMax HB10V myCharge in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Portable Charger (Power Bank) |
| Model | HubMax HB10V |
| Brand | myCharge |
| Battery Capacity | 10000 mAh |
| Input | Micro USB: 5V/2A; USB-C: 5V/2A |
| Output | USB-A: 5V/2.4A; USB-C: 5V/2.4A |
| Total Output Current | Up to 2.4A (shared) |
| Dimensions | 150 x 72 x 15 mm |
| Weight | 255 g |
| Power Source | Rechargeable Li-ion battery |
| Charging Time | Approximately 6 hours (with 2A charger) |
| Number of Ports | 2 (USB-A and USB-C) |
| LED Indicators | 4-level battery status |
| Protection Features | Overcharge, overdischarge, short circuit, overcurrent protection |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -10°C to 50°C |
| Maintenance | Clean with dry cloth; avoid moisture |
| Safety Precautions | Do not disassemble, expose to heat, or puncture |
| Repairability | Non-user-serviceable; contact myCharge for service |
| Compliance | CE, FCC, RoHS |
| Package Contents | HubMax HB10V, Micro USB cable, user manual |
Frequently Asked Questions - HubMax HB10V myCharge
Can the HubMax HB10V charge multiple devices simultaneously?
Yes, it has two output ports (USB-A and USB-C) that can charge two devices at the same time. However, the total output current is limited to 2.4A, so charging speed may be reduced when both ports are used.
How do I know when the power bank is fully charged?
When charging the power bank itself, the four LED indicators will blink during charging. Once all four LEDs are solid and stop blinking, the power bank is fully charged.
Can I charge a laptop with this power bank?
No, the HubMax HB10V is designed for charging mobile devices such as smartphones and tablets. It outputs at 5V, which is too low for most laptops that require higher voltage (e.g., 20V).
What should I do if the power bank gets wet?
Immediately stop using it and dry it thoroughly with a soft cloth. Do not attempt to charge it until completely dry. Avoid exposure to moisture to prevent damage.
How long does it take to charge the HubMax HB10V?
With a standard 5V/2A charger, it takes approximately 6 hours to fully charge the power bank. Using a lower current charger will increase the charging time.
Is it safe to leave the power bank plugged in overnight?
Yes, the HubMax HB10V has overcharge protection, so it will stop charging automatically when the battery is full. It is safe to leave it plugged in overnight.
Can I use a USB-C to USB-C cable to charge my phone?
Yes, the USB-C port supports both input and output. You can use a USB-C to USB-C cable to charge compatible devices.
What does it mean when one LED is flashing?
When the power bank is in use, a single flashing LED usually indicates low battery (0-25% remaining). Charge the power bank soon.
Does the power bank support fast charging?
No, the HubMax HB10V does not support Qualcomm Quick Charge or USB Power Delivery. It provides standard 5V output only.
How should I store the power bank for long periods?
Store it in a cool, dry place at around 50% charge. Avoid extreme temperatures and direct sunlight to prolong battery life.
User questions about HubMax HB10V myCharge
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Chargeur pour appareil mobile in PDF format for free! Find your manual HubMax HB10V - myCharge and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HubMax HB10V by myCharge.