LC-XNB3000N - Video projector EIKI - Free user manual and instructions
Find the device manual for free LC-XNB3000N EIKI in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Video Projector |
| Brand | EIKI |
| Model | LC-XNB3000N |
| Display Technology | 3LCD |
| Resolution | 1024 x 768 (XGA) |
| Brightness | 3000 ANSI Lumens |
| Contrast Ratio | 500:1 |
| Lamp Type | UHP Lamp |
| Lamp Life | 2000 hours (Eco mode: 3000 hours) |
| Image Size (Diagonal) | 40 - 300 inches |
| Projection Distance | 1.2 - 10.0 m |
| Zoom Ratio | 1.2x manual zoom |
| Keystone Correction | Vertical: +/- 30 degrees |
| Inputs | VGA, Composite Video, S-Video, Component, HDMI, Audio |
| Outputs | Monitor Out, Audio Out |
| Built-in Speaker | 1 x 5W mono |
| Weight | 7.5 kg |
| Dimensions (W x D x H) | 380 x 340 x 120 mm |
| Power Consumption | 320 W (Standby: 5W) |
| Noise Level | 35 dB (Eco mode: 30 dB) |
| Maintenance & Cleaning | Clean air filter every 100 hours; replace lamp after 2000 hours. |
| Safety | Automatic lamp shut-off when cover is open; overheat protection. |
| Spare Parts & Repairability | Replacement lamp available; filter kit; service centers worldwide. |
| General Information | Manual available for free download on notice-facile.com. |
Frequently Asked Questions - LC-XNB3000N EIKI
How do I replace the lamp in my EIKI LC-XNB3000N?
Turn off and unplug the projector. Wait 30 minutes for cooling. Remove the lamp cover screw, slide open the cover, disconnect the lamp connector, remove the old lamp, insert the new one, reconnect, close cover, and reset the lamp timer via the menu.
What should I do if the projector does not turn on?
Check the power cable and outlet. Ensure the lamp cover is closed properly. The Lamp and Temp indicator lights can help diagnose issues. A flashing red light may indicate a lamp failure.
How to clean the air filter?
Turn off and unplug the projector. Slide out the filter cover, remove the filter, and vacuum or wash with mild detergent. Dry completely before reinstalling. Clean every 100 hours of use.
What connectivity options does the LC-XNB3000N have?
It includes VGA, HDMI, Composite Video, S-Video, Component Video, and Audio inputs. Outputs include Monitor Out and Audio Out.
Can I use a projection screen with this projector?
Yes, any standard projection screen works. The projector can display images from 40 to 300 inches diagonal. Adjust zoom and focus for optimal clarity.
How do I adjust keystone correction?
Press the Keystone button on the remote or control panel, then use the arrow keys to correct vertical distortion. The range is +/- 30 degrees.
Is the projector compatible with 3D content?
This model does not support 3D projection. It is designed for standard 2D presentations and video.
What is the recommended lamp replacement interval?
The lamp lasts approximately 2000 hours in normal mode and up to 3000 hours in eco mode. Replace when the message appears or image brightness dims.
How to reset the lamp timer after replacement?
Go to the Setup menu, select Lamp Time Reset, hold the Enter button for 3 seconds until the timer resets to 0.
Where can I download the user manual?
You can download the manual for free in PDF format from notice-facile.com. Search for 'EIKI LC-XNB3000N' and choose the desired language.
User questions about LC-XNB3000N EIKI
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Video projector in PDF format for free! Find your manual LC-XNB3000N - EIKI and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. LC-XNB3000N by EIKI.