7402 - Dishwasher MAYTAG - Free user manual and instructions
Find the device manual for free 7402 MAYTAG in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Built-in Dishwasher |
| Brand | Maytag |
| Model | 7402 |
| Height | 34.5 inches (87.6 cm) |
| Width | 24 inches (61 cm) |
| Depth | 24 inches (61 cm) |
| Weight | 75 lbs (34 kg) |
| Power Supply | 120 V, 60 Hz, 15 A |
| Wash Cycles | Normal, Heavy, Light, Rinse Only |
| Options | Heated Dry, Sanitize, Delay Start |
| Capacity | 14 place settings |
| Noise Level | 55 dBA |
| Energy Use | 275 kWh/year |
| Water Use | 4.5 gallons per cycle |
| Filtration | Self-cleaning filter |
| Control Type | Electronic with digital display |
| Rack Configuration | Upper and lower racks with adjustable tines |
| Safety Features | Child lock, leak detection |
| Maintenance | Clean filter monthly, run cleaning cycle with descaler |
| Installation | Under-counter, hardwired or plug-in |
| Spare Parts | Available via Maytag website or authorized dealers |
Frequently Asked Questions - 7402 MAYTAG
How do I start a cycle on my Maytag 7402 dishwasher?
Load dishes, add detergent, select cycle (e.g., Normal), close door securely, and press Start. The dishwasher will begin after a short delay.
Why is my dishwasher not cleaning dishes properly?
Check for clogged spray arms, use rinse aid, ensure water temperature is at least 120°F (49°C), and use appropriate detergent. Also clean the filter regularly.
How do I clean the filter on the Maytag 7402?
Remove the lower rack, twist the filter assembly counterclockwise, lift it out, rinse under running water, scrub with a soft brush if needed, and reinstall.
What does the 'Sanitize' option do?
The Sanitize option raises the final rinse temperature to at least 155°F (68°C) to kill bacteria. It may extend cycle time.
How can I reduce noise from my dishwasher?
Ensure the dishwasher is level, avoid overloading, check for loose items in racks, and make sure the door seal is intact.
My dishwasher displays an error code. What should I do?
Refer to the user manual for code descriptions. Common codes: 'F1' (control board issue), 'F2' (water leak). Try resetting by turning off power for 5 minutes.
Can I use dishwashing tablets in the Maytag 7402?
Yes, place tablets in the main detergent compartment or use the tablet dispenser if available. Ensure the compartment is dry before adding.
How do I adjust the upper rack height?
Remove the upper rack, adjust the wheel height (usually two positions), and reinstall. This helps accommodate larger items in the lower rack.
Why is there standing water at the bottom after a cycle?
Check the filter for clogs, ensure the drain hose is not kinked, and verify the garbage disposal plug (if connected) is removed.
Where can I find replacement parts for the Maytag 7402?
Visit Maytag's official website or contact authorized parts dealers. Common parts: racks, spray arms, filters, heating element, and door latch.
User questions about 7402 MAYTAG
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Dishwasher in PDF format for free! Find your manual 7402 - MAYTAG and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 7402 by MAYTAG.