GSD5320 - Dishwasher GE - Free user manual and instructions
Find the device manual for free GSD5320 GE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Built-in Dishwasher |
| Brand | GE |
| Model | GSD5320 |
| Width | 24 inches |
| Height | 34.5 inches |
| Depth | 24 inches |
| Weight | Approximately 100 lbs |
| Power Supply | 120V, 60Hz, 15A |
| Wash Cycles | Normal, Heavy, Light, Rinse Only |
| Drying Option | Heated Dry |
| Number of Racks | 2 (upper and lower) |
| Place Settings | 14 |
| Energy Star Rated | Yes |
| Noise Level | Approximately 55 dB |
| Control Type | Electronic touch pad |
| Delay Start | Available (up to 8 hours) |
| Soil Sensor | Yes |
| Self-Cleaning Filter | Yes |
| Water Usage | Approximately 6 gallons per cycle |
| Installation Type | Built-in under counter |
| Warranty | 1 year parts and labor |
Frequently Asked Questions - GSD5320 GE
How do I start a wash cycle on my GE GSD5320 dishwasher?
To start a cycle, ensure the door is fully closed and latched. Press the Start/Reset button. The dishwasher will begin the selected cycle after a brief delay.
What should I do if the dishwasher does not start?
Check that the door is closed securely, the child lock is off, and the dishwasher is plugged in. Also verify that the water supply is turned on and the circuit breaker has not tripped.
How do I clean the filter on my GE GSD5320?
The filter is located at the bottom of the dishwasher. Turn it counterclockwise to remove, rinse under running water, and reinstall by turning clockwise until it locks. Clean monthly for best performance.
Can I use a rinse aid with this model?
Yes, the GSD5320 has a rinse aid dispenser. Fill it with a recommended rinse aid to improve drying and reduce spots.
How do I adjust the upper rack height?
To adjust the upper rack, pull it out fully, lift the rack release tabs on each side, and reposition the rack to the desired height. Ensure it locks into place.
What does the 'Heated Dry' option do?
The Heated Dry option activates a heating element to speed up drying. It may increase energy use but results in drier dishes.
How do I cancel a cycle?
To cancel a running cycle, press and hold the Start/Reset button for about 3 seconds. The dishwasher will drain and reset. Wait for the cycle to complete before opening.
What is the 'Delay Start' feature?
You can program the dishwasher to start at a later time. Press Delay Start and use the hour buttons to set a delay of up to 8 hours.
How do I clean the spray arms?
Remove the spray arms by unscrewing the retaining nut. Rinse with warm water and use a toothpick to clear any clogged holes. Reattach securely.
Why is there water remaining in the bottom after a cycle?
A small amount of water is normal to keep seals moist. If excess water remains, check for a clogged drain or a kinked drain hose. Ensure the filter is clean.
User questions about GSD5320 GE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Dishwasher in PDF format for free! Find your manual GSD5320 - GE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. GSD5320 by GE.