GNF 41810 X - Dishwasher GRUNDIG - Free user manual and instructions
Find the device manual for free GNF 41810 X GRUNDIG in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Fully Integrated Dishwasher |
| Brand | Grundig |
| Model | GNF 41810 X |
| Place Settings | 14 |
| Energy Efficiency Class | A+ |
| Annual Energy Consumption | 290 kWh |
| Water Consumption per Cycle | 10 L |
| Drying Efficiency Class | A |
| Number of Programs | 6 (including Eco 50°C, Intensive 70°C, Quick 30min, etc.) |
| Noise Level | 47 dB(A) |
| Dimensions (H x W x D) | 81.5 - 86.5 x 59.8 x 57.5 cm |
| Adjustable Height | Yes, via adjustable feet |
| Net Weight | 45 kg |
| Power Supply | 220-240 V, 50 Hz, 10 A |
| Features | Delayed start (3-9 hours), Half load, Intensive Zone, AquaStop, Child lock |
| Cutlery Basket | Third cutlery tray |
| Baskets Material | Stainless steel |
| Drying System | Condensation drying |
| Maintenance | Clean filters regularly, rinse aid and salt required |
| Spare Parts Availability | Available for 10 years after production |
Frequently Asked Questions - GNF 41810 X GRUNDIG
How do I install the Grundig GNF 41810 X dishwasher?
Installation should be done by a qualified professional. Ensure the appliance is level and connected to water supply and drainage. Refer to the manual for detailed steps. Use the adjustable feet to level the dishwasher.
What should I do if the dishwasher doesn't start?
Check if the door is properly closed, the appliance is plugged in, and the circuit breaker is on. Also ensure water supply is open and the delay start function is not activated. If the problem persists, contact service.
How do I clean the filters?
Turn off the dishwasher and remove the lower spray arm. Twist and lift out the filter assembly. Rinse under running water and remove any debris. Reassemble by pressing down and twisting to lock. Clean filters every month.
Why is there water left in the dishwasher after a cycle?
This may be due to a blocked filter or drain hose. Check the drain hose for kinks and clean the filter. Ensure the dishwasher is properly leveled. If the issue persists, the drain pump may need service.
Can I use regular dish soap instead of dishwasher detergent?
No, only use dishwasher detergent (powder, gel, or tablets). Regular soap creates excessive suds and can damage the appliance. Always add rinse aid for better drying.
How do I enable the child lock?
Press and hold the Start/Pause button for 3 seconds until the child lock indicator lights up. To disable, repeat the same action. The child lock prevents accidental changes to the program.
What does the AquaStop feature do?
AquaStop is a safety system that prevents water leaks. It shuts off the water supply if a leak is detected. If activated, the inlet hose may need replacement; contact a service technician.
How do I adjust the height of the upper basket?
Pull out the upper basket and locate the side levers. Press both levers and lift or lower the basket to the desired position. The default height is suitable for most loads.
What is the recommended salt and rinse aid?
Use dishwasher salt specifically for water softener and rinse aid for better drying. Adjust the dosage according to water hardness. Refer to manual for settings.
How do I troubleshoot error codes?
Error codes are shown on the display. For example, E1 indicates water inlet issue, E2 drainage problem. Turn off the dishwasher, wait a few minutes, and restart. If the code persists, consult the manual or contact service.
User questions about GNF 41810 X GRUNDIG
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Dishwasher in PDF format for free! Find your manual GNF 41810 X - GRUNDIG and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. GNF 41810 X by GRUNDIG.