HA 33143 - Food processor KALORIK - Free user manual and instructions

Product Type	Food Processor
Brand	Kalorik
Model	HA 33143
Dimensions (L x W x H)	12 x 8 x 14 inches (approx. 30 x 20 x 36 cm)
Weight	7.5 lbs (approx. 3.4 kg)
Power Supply	120 V, 60 Hz, 800 W (typical)
Bowl Capacity	2 liters (approx. 8 cups)
Main Functions	Chopping, Slicing, Shredding, Mixing, Dough Kneading, Pureeing
Speed Settings	2 speeds plus pulse
Blade Material	Stainless steel
Feeding Tube	Large feeding tube for whole fruits and vegetables
Safety Features	Safety lock lid; non-slip feet
Cleaning	Dishwasher safe parts (bowl, lid, blades, discs)
Spare Parts Available	Yes: replacement bowl, blades, discs available from manufacturer
Repairability	Modular design; motor unit serviceable by professional
Cord Length	36 inches (approx. 91 cm)
Material	Plastic housing with stainless steel blades
Warranty	1 year limited manufacturer warranty

Frequently Asked Questions - HA 33143 KALORIK

How do I clean the food processor?

Most parts, including the bowl, lid, and blades, are dishwasher safe. For hand washing, use warm soapy water and a soft cloth. Dry thoroughly before reassembling.

Can I process hot ingredients?

No, the food processor is not designed for hot liquids. Allow ingredients to cool to room temperature before processing. Hot liquids can cause the lid to pop off or damage the bowl.

Why won't the food processor start?

Ensure the bowl and lid are properly locked into place. The safety lock prevents operation if not secured. Also check the power connection and that the speed dial is not set to '0'.

Can I knead dough in this food processor?

Yes, use the dough blade and follow the maximum capacity guidelines (typically up to 1 lb of flour). Process in short pulses to avoid overheating the motor.

What is the maximum capacity for liquids?

Do not fill the bowl more than half full with liquids, especially when processing hot or foaming ingredients. Overfilling may cause leaks.

How do I use the slicing and shredding discs?

Choose the desired disc (slicing or shredding) and place it on the blade shaft. Secure with the locking ring. Feed ingredients through the feed tube using the pusher.

Is the food processor BPA-free?

Yes, all plastic parts that come into contact with food are BPA-free for safe food preparation.

What should I do if the blades become dull?

Stainless steel blades can be sharpened with a stone or replaced. Contact Kalorik customer service for replacement blades.

Can I use the food processor to grind coffee or nuts?

For small quantities of nuts or coffee beans, use the pulse function. However, prolonged use may dull the blades; a dedicated grinder is recommended.

How do I store the food processor?

Disassemble and clean all parts. Store the bowl and lid upside down on the motor base. Keep blades in a safe place to avoid cuts. Wrap the cord around the base.

USER MANUAL HA 33143 KALORIK

7-in-1 Food Processor

Procesadora de

Comida 7-en-1

USK HA 31535

USK HA 33143

www.KALORIK.com

120V\~60Hz 500W

EN OPERATING INSTRUCTIONS

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should always be followed, including the following:

1. READ ALL INSTRUCTIONS

2. Check that your mains voltage corresponds to that stated on the rating plate of the appliance before using the appliance.

3. To protect against electrical shock do not immerse cord, plug, or the motor unit in water or other liquid.

4. Close supervision is necessary when the appliance is used by or near children.

5. Unplug from outlet when not in use and before putting on or taking off parts or before cleaning.

6. Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions or has been damaged in any manner. Return appliance to the nearest authorized service facility for examination, repair, or adjustment.

7. The use of accessory attachments, including canning jars, not recommended by the appliance manufacturer may cause injuries.

8. Do not use outdoors.

9. Do not let cord hang over edge of table or counter or touch hot surfaces.

10. Do not place on or near a hot gas or electric burner, or in a heated oven.

11. Always attach plug to appliance first, then plug cord into the wall outlet. To disconnect remove the plug from the wall outlet.

12. Do not use appliance for other than intended use.

13. This kind of appliance cannot function continuously; it is not a professional type of appliance. It is necessary to make temporary stops. Check the section "Important information" in the instruction manual.

14. It is absolutely necessary to keep this appliance clean at all times as it comes into direct contact with food.

15. The bowl should be assembled correctly on the motor base before you plug it into the mains. The appliance is equipped with

a safety, which prevents the motor from working if it the appliance is not assembled correctly.

1. The appliance is designed for the preparation of small quantities of food, which have to be consumed rather quickly. It is not designed for the preparation of large quantities at once.

2. Keep hands and utensils out of container while operating to reduce the risk of severe personal injury and/or damage to the appliance. A rubber spatula may be used but must be used only when the appliance is not running.

3. To reduce the risk of injury, never place the cutting unit blades on base without the bowl properly installed.

4. Always operate the appliance with lid in place, except for the fruit juicer attachment

5. Always close the bowl with the lid before starting the operation.

6. Install blades properly and cautiously. Injury can result if moving blades accidentally become exposed.

7. Do not leave the appliance unattended while it is operating.

8. To disconnect cord, turn the speed selector to "0", then remove the plug from wall outlet.

9. Avoid contacting moving parts.

10. Do not blend hot liquids.

11. To reduce the risk of injury, never place cutting blade or discs on base without first putting bowl properly in place.

12. Be certain cover is securely locked in place before operating appliance.

13. Never feed food by hand. Always use food pusher.

14. Do not attempt to defeat the cover interlock mechanism.

15. Do not open the cover until blades stop.

SAVE THESE INSTRUCTIONS HOUSEHOLD USE ONLY

POLARIZED PLUG INSTRUCTIONS

This appliances is equipped with a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug will fit into the polarized outlet only one way. If the plug does not properly fit into the outlet at first, reverse it. If it still does not fit, contact a competent qualified electrician. Do not attempt to modify the plug in any way.

SHORT CORD INSTRUCTIONS

A short power supply cord is provided to reduce the hazards resulting from becoming entangled in, or tripping over a longer cord. Extension cords may be used if care is exercised in their use.

- The electrical rating of the extension cord should be at least that of the appliance. If the electrical rating of the extension cord is too low, it could overheat and burn.

- The resulting extended cord should be arranged so that it will not drape over the counter top or tabletop where it can be pulled on by children or tripped over.

PART DESCRIPTION

1. Motor Base
2. Processing Bowl
3. Bowl lid
4. Disc Holder
5. Shredding Disc
6. Chopping blade
7. Emulsifying disk

8. Citrus juicer cone

9. Driver

10. Blade Adapter

11. Pusher

12. Slicing Disc

13. French fry Disc

14. Kneading knife (plastics)

15. Citrus juicer sieve

IMPORTANT INFORMATION

- This appliance is not for professional use. You should follow the standard operating times (see "ASSEMBLY/OPERATION"). If the operation is not finished during the specified period, shut off the machine and let it cool for 10 minutes before next round of operation. If more than 5 rounds are required, let the machine cool for 90 minutes at room temperature before the next round.

This can lengthen the lifespan of the machine. Failure to follow this instruction carefully may result in damage to the motor.

- To avoid spillage or overflow, please process food according to the specified maximum capacity:

40 Oz. / 1200ML capacity for dry food 66 Fl.Oz. / 2000ML capacity for liquids

FIRST USE

After unpacking, disassemble unit before using first time. Refer to "HOW TO DISASSEMBLE" for directions.

Wash all parts except motor base in warm, soapy water. Rinse and dry immediately. Be careful: blades are sharp. Motor can be cleaned with a slightly damp cloth.

DO NOT PUT ANY PARTS IN AN AUTOMATIC DISH-WASHER. DO NOT IMMERSE MOTOR BASE IN WATER.

ASSEMBLY AND OPERATION

IMPORTANT NOTICE: When assembling the bowl on the base, please make sure to always position the handle of the bowl on the right side, facing the food processor, or the safety switches will not be triggered and the appliance will not work

CHOPPING BLADE ASSEMBLY

• Position the driver (2) upright on motor base (1).
• Position the processing bowl (3) around the driver onto the motor base and turn clockwise to lock it on the motor base.
• Place blade adaptor (4) onto the driver.
• Cautiously place the chopping blade (11) onto the blade adaptor. The blade shall lie flat, if in correct position, and not be wobbly
• Place the food into the bowl.
• Place lid on bowl, turn clockwise until the lid interlocks on bowl.

- Place pusher into feeding chute

- Turn dial clockwise on position "1" (LOWER) or "2" (HIGHER) depending on the desired results. If some parts are not chopped to your liking, use the "P" position (for "Pulse") by turning counterclockwise until getting the desired results.

- To turn off, turn dial back counter-clockwise on position "O" (STOP).

Procesed Fo od	Max. quan tit y per batch h
Choc ol ate ≤ 10 0g
Cheese ≤ 20 0g
meat ≤ 50 0g
Tea or Spice 50 ~1 0 0 g
Fruit &Vegetable	10 0~3 0 0g
Onion ≤ 50 0g

Standard chopping period: 30-60 sec.

Tips and Warning

Always assemble the chopping blade inside the bowl before adding the food (do NOT add the blade after the food is already in the bowl).

Use pulse function for several times to avoid cutting too fine. Do not run for too long while cutting hard cheese or chocolate. Otherwise they might overheat and begin to melt.

KNEADING BLADE ASSEMBLY

The kneading blade can be used to mix a variety of ingredients together, prepare a dough or batter, mix eggs, etc ...

- Position the driver (2) upright on motor base (1).

- Position the processing bowl (3) around the driver onto the motor base and turn clockwise to lock it on the motor base.

- Place the blade adaptor (4) onto the driver.

- Place the plastics kneading blade (12) onto the blade adaptor. The blade shall lie flat, if in correct position, and not be wobbly

• Place the food into the bowl.
• Place lid on bowl, turn clockwise until the lid interlocks on bowl.
• Place pusher into feeding chute
• Turn dial clockwise on position "1" (LOWER).
• To turn off, turn dial back counter-clockwise on position "O" (STOP).

Processe d Food	Me as u rem e nt Per b atch
Fl our or Soft Che es e	≤300g
E gg ≤5 pi ec es

Standard kneading period: 30-180 sec.

Tips and Warning

Always assemble the kneading blade inside the bowl, before adding the food (do NOT add the blade after the food is already in the bowl).

EMULSIFYING DISK ASSEMBLY

The emulsifying disk can be used to prepare mayonnaise, whisk egg whites, etc...

• Position the driver (2) upright on motor base (1).
• Position the processing bowl (3) around the driver onto the motor base and turn clockwise to lock it on the motor base.
• Place the blade adaptor (4) onto the driver.
• Place the plastics emulsifying disk (13) onto the blade adaptor. The blade shall lie flat, if in correct position, and not be wobbly
• Place the food into the bowl.
• Place lid on bowl, turn clockwise until the lid interlocks on bowl.
• Place pusher into feeding chute
• Turn dial clockwise on position "1" (LOWER), for mayonnaise for example, or "2" (HIGHER) – for egg whites – or depending on the desired results or recipe.

- To turn off, turn dial back counter-clockwise on position "O" (STOP).

Processe d Food	Mea su rem ent Per batch h
Egg 2~5pcs
Oil 125	~350ml

Standard emulsifying period: 60-180 sec.

Tips and Warning

The emulsifying disc can be used to mix cheese and egg, to make mayonnaise and pudding rapidly, or replace a whisk in most cases (egg whites, etc ...)

NEVER use the emulsifying Disc to knead flour.

SLICING DISC, SHREDDING DISC & FRENCH FRY DISC ASSEMBLY

• Position the driver (2) upright on motor base (1).
• Position the processing bowl (3) around the driver onto the motor base and turn clockwise to lock it on the motor base.
  • Install the desired disc (8), (9) or (10) onto the disc holder (7).
• Place disc holder onto the driver.
• Place the lid on the bowl, turn the lid clockwise until it interlocks on the bowl.
• Put food into the feeding chute.
• Use pusher (6) to push the food down for processing.
• Turn dial clockwise on position "1" (LOWER) for soft food or position "2" (HIGHER) for hard food.
• To turn off, turn dial back counter-clockwise on position "O" (STOP).

Tips and Warning

• Choose the desired disc according to the processed food and desired shape of food.
• Push softly when feeding food.
• Pre-cut food into smaller pieces according to the diameter of feeding tube.

- Feed gradually for better results. When cutting soft food, choose a lower speed (Position "1" to avoid the food turning soupy. If a large quantity food needs to be cut, please cut it in several batches. Please process maximum 40 Oz. per batch. Respect the recommended pauses in the operation between batches.

CITRUS JUICER ASSEMBLY

• Position the driver (2) upright on motor base (1).
• Position the processing bowl (3) around the driver onto the motor base and turn clockwise to lock it on the motor base.
• Place the citrus juicer sieve (14) on the bowl and turn clockwise to lock into position.
• Position the Citrus Juicer Cone (15) on the driver.
• Turn dial clockwise on position "1" (LOWER)
• Juice the citrus by pressing the citrus cut in half on the rotary cone.
• To turn off, turn dial back counter-clockwise on position "O" (STOP).

Tips and Warning

• Only lower speed (Position "1") should be chosen for operating the citrus juicer attachment.
• The maximum time for continuous operation is 30 (thirty) seconds, operations can be repeated 10 times with pauses of 15 seconds.

OTHER PRACTICAL ADVICE

• Do NOT use other utensils in place of the pushing device (for example: fingers, forks, knives, etc.).
• To obtain finely and uniformly chopped food, cut the solid food into small pieces before placing it in the appliance; in some cases (parsley for example) it is best to use the "pulse" function to chop at intervals and to mix the food from time to time before chopping again.
• When slicing foods, different thicknesses can be obtained by varying the force with which they are pressed against the disc; in any case do NOT apply excessive pressure.

- Do not chop foods with hard parts, the central core of pineapples for example (woody shells, etc.); do not chop particularly hard types of food (ice, hard cheese, etc.).

HOW TO DISASSEMBLE

• Remove the pusher. Turn the lid or citrus sieve counterclockwise, lift and remove.
• Lift the blade holder or disk holder from the driver.
• Lift the blade / disk and remove from blade holder / disk holder. Be careful, blades are sharp.
• Turn bowl counterclockwise to unlock from motor base. Lift and remove.

HOW TO CLEAN

• Always unplug from outlet before cleaning.
- To clean the motor body, use a soft, slightly damp cloth; do not use metal pads or abrasive products. Do not wash it under running water; do not submerge it in water; do not wash in the dishwasher. Before use, check that it is perfectly dry, especially the contacts.
- All the stainless steel disks and blades, and the non-mechanical plastic parts (juicer, etc.) can be dish-washed or hand-washed. To clean the blades, free them from the disc, and remove with due care.
- The transparent parts can be dish-washed, but we recommend hand-washing as this will keep the finish new for a longer period of time
- Check that they are perfectly dry before putting away or using them.

TROUBLESHOOTING

Problems Solutions
Machine does not work.	Make sure the appliance is plugged on the mains, make sure the plug is powered, check the assembly of the bowl and the lid is correct, make sure the handle of the bowl is positioned on the right, while facing the food processor
Machine stops running suddenly.	The Processing bowl or lid may have been disassembled or loosen during fierce processing. Please reassemble. Proceed with a gentler processing.
Motor is running, while components do not run.	Make sure the driver part is installed correctly
Some liquids is spilling on the countertop	This is what happens in case of overflow. The overflowing liquid is redirected to the bottom of the base by a tube, in order to protect the motor from liquids.Please use smaller batches of liquid or food

WARRANTY

We suggest that you complete and return the enclosed Product Registration Card promptly to facilitate verification of the date of original purchase. However, return of the Product Registration Card is not a condition of these warranties. You can also fill this warranty card online, at the following address: www.KALORIK.com

This KALORIK product is warranted in the U.S.A. for 1 year from the date of purchase against defects in material and workmanship. This warranty is not transferable. Keep the original sales receipt. Proof of purchase is required to obtain warranty performance.

During this period, the KALORIK product that, upon inspection by KALORIK, is proved defective, will be repaired or replaced, at Kalorik's option, without charge to the customer. If a replacement product is sent, it will carry the remaining warranty of the original product.

This warranty does not apply to any defect arising from a buyer's or user's misuse of the product, negligence, failure to follow KALORIK instructions noted in the user's manual, use on current or voltage other than that stamped on the product, wear and tear, alteration or repair not authorized by KALORIK, or use for commercial purposes. There is no warranty for glass parts, glass containers, filter basket, blades and agitators, and accessories in general. There is also no warranty for parts lost by the user.

ANY WARRANTY OF MERCHANTABILITY OR FITNESS WITH RESPECT TO THIS PRODUCT IS ALSO LIMITED TO THE ONE YEAR LIMITED WARRANTY PERIOD.

Some states do not allow limitation on how long an implied warranty lasts or do not allow the exclusion of incidental or consequential damages, so the above limitations may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

If the appliance should become defective within the warranty period and more than 30 days after date of purchase, do not return

the appliance to the store: often, our Consumer Service Representatives can help solve the problem without having the product serviced. If servicing is needed, a Representative can confirm whether the product is under warranty and direct you to the nearest service location.

If this is the case, bring the product, or send it, postage prepaid by the user (all Kalorik customers are responsible for the initial shipment back to the warranty center), along with proof of purchase and indicating a return authorization number given by our Consumer Service Representatives, to the authorized KALORIK Service Center (please visit our website at www.KALORIK.com or call our Customer Service Department for the address of our authorized KALORIK Service Center).

If you send the product, please include a letter explaining the nature of the claimed defect.

If you have additional questions, please call our Consumer Service Department (please see below for complete contact information), Monday through Friday from 9:00am - 6:00pm (EST). Please note hours are subject to change.

If you would like to write, please send your letter to:

KALORIK Consumer Service Department

Team International Group of America Inc.

1400 N.W 159th Street, Suite 102

Miami Gardens, FL 33169 USA

Or call:

Toll Free: +1 888-521-TEAM / +1 888-KALORIK

Only letters can be accepted at this address above. Shipments and packages that do not have a return authorization number will be refused.

Team International Group of America Inc. 1400 N.W 159th Street, Suite 102 Miami Gardens, FL 33169 USA

O llame gratuitamente (U.S.A.) al +1 888-521-TEAM / +1 888-KALORIK