Power Cube 5200 - Power bank Vantec - Free user manual and instructions

Product Type	Power Bank
Brand	Vantec
Model	Power Cube 5200
Capacity	5200 mAh
Input	Micro USB: 5V/1A
Output	USB-A: 5V/1A
Dimensions	Approx. 9.5 x 4.5 x 2.2 cm
Weight	Approx. 120 g
Battery Type	Lithium-ion
Charging Time	Approx. 5-6 hours
LED Indicators	4 LED lights for battery level
Compatibility	Smartphones, tablets, and other USB devices
Safety Features	Overcharge, over-discharge, overcurrent, and short circuit protection
Material	Plastic casing
Color	White (typical)
Included Accessories	Micro USB cable, user manual
Operation Temperature	0°C to 45°C
Storage Temperature	-20°C to 60°C
Certifications	CE, RoHS

Frequently Asked Questions - Power Cube 5200 Vantec

How do I charge the Power Cube 5200?

Connect the included Micro USB cable to the input port and a USB power source such as a computer or wall charger. The LED indicators will show the charging status.

How many times can it charge my phone?

This depends on your phone's battery capacity. For example, a typical 3000mAh phone can be charged about 1.5 times, accounting for energy loss.

Can I charge two devices at once?

The Power Cube 5200 has only one output port, so it can charge only one device at a time.

How do I check the remaining battery level?

Press the power button briefly. The four LED lights will indicate the charge level: 1 light = 25%, 2 lights = 50%, 3 lights = 75%, 4 lights = 100%.

Is it safe to leave the power bank plugged in overnight?

Yes, the Power Cube 5200 has overcharge protection, so it will stop charging when full. However, it's best to unplug once fully charged to prolong battery life.

Can I use the power bank while it is charging?

Yes, you can use it as a pass-through charger, but it may slow down the charging process and generate extra heat.

What devices are compatible with the Power Cube 5200?

Any device that charges via USB, such as smartphones, tablets, Bluetooth headphones, and portable speakers, as long as the current requirement does not exceed 1A.

How do I clean the power bank?

Use a dry, soft cloth to wipe the exterior. Do not use liquids or abrasives. Keep the ports free of dust.

What should I do if the power bank gets wet?

Disconnect immediately and let it dry completely in a well-ventilated area. Do not use if water has entered the device; contact Vantec support.

How do I dispose of the power bank?

Do not throw it in household waste. Recycle it at a designated battery collection point or follow local regulations for electronic waste.

USER MANUAL Power Cube 5200 Vantec

POWER CUBE 5200

Portable Battery Bank

User's Guide

All Registered Trademarks Belong To Their Respective Companies.

© 2012 Vanted Thermal Technologies. All Rights Reserved.

Introduction

Thank you for purchasing the Vantec Power Cube \$200.

This User's Manual provides operations for Power Cube which is a rechargeable power pack with two SV USB output ideal for powering and charging iPod, iPhone, iPad, cell phones, MP3/MP4 players, GPS, Bluetooth devices, portable gaming systems, and other USB powered devices via a USB charging cable.

Introducción

Battery Type:	Lithium-Ion
Battery Capacity:	5200mAh
Power Input:	5V 1A
Power Output:	Port I - 5V 2.0APort II - 5V 2.0A
Recharge Time:	4 to 4.5 hours DC12 hours via USB
Dimensions:	86 x 58.5 x 23.5mm
Weight:	146g
Operating Temp.:	-10~50°C (14~122°F)
Protection:	Over Charge Protection, Over Discharging Protection, Over Current Protection, Short Circuit Protection, Over Temperature Protection

Package Contents:

Power Cube 5200

Micro-USB Cable User's Manual

User's Manual

Please read the following carefully before using Power Cube S200. Incorrect use or incompatibility with your device may result in reduced battery performance or damage to your device.

- Check device voltage for compatibility with this product. - Do not attempt to disassemble the product. - Do not push the power indication button with excessive force

-Store and operate between -10–50°C (14–122°F). -Do not allow this product to have contact with liquids. -Do not place this product near a heat source or flame or it may explode. -Do not throw or shake the Power Cube. -Do not operate the Power Cube if it has been subjected to shock damage.

-Do not crush or puncture the battery. -Recharge the power pack every 3 months when not use. Use soft cloth to clean the exterior. Do not use harsh chemicals or strong cleaning solvents.

-The battery life will cut down to 80% of original capacity after approximately 500 times of use.

Precauzioni d'us

Product Overview:

A. Power Button

B. Smart LED Indicator

C. 5V USB Output Port

D. 5V USB Output Port

E. Charge Input Port

To use the LED indicator, press on the power button. Please refer to the following table for the capacity status of your Power Cube 5200.

Illuminate for 3 Seconds	71~100%
Slow Blinking	31~70%
Quick Flashing	0~30%

Blue LED indicates capacity remaining

Red LED indicates charging

Charging the Power Cube

1. To charge the Power Cube, connect the Type-A to Micro-B USB cable to a USB power source (ie. Computer USB port or 5V USB power adapter).

2. When the LED indicator shuts off, your Power Cube 5200 is fully charged and ready for use.

Using the Power Cube

1. Insert a compatible USB charging cable to either Port I or Port II.

2. Connect USB charging cable to your hand-held device

3. Press on the LED power button to begin charging your device

The Power Cube 5200 comes with a 1 year limited warranty (90 day parts). If your unit should become defective within that time frame, please go to www.vantecusa.com for information on how to receive warranty exchange or repair. Cosmetic defects and missing parts are not covered under this warranty. Please check the contents of the unit to make sure you received all parts. Please keep your receipt in a safe place. The warranty applies to damages caused through normal use and is void if it is determined that the device was damaged because of abuse, alteration, misuse, negligence, incorrect voltage supply, air/water pollution, accidents and natural disasters.

iPod®, iPad®, and iPhone™ are trademarks of Apple Inc., registered in the U.S. and other countries. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. © 2012 Vantec Thermal Technologies. All Rights Reserved.

Information in this document is subject to change without notice. Reproduction of these materials in any manner whatsoever without written permission is strictly forbidden.

Printed on Recycled Paper.