AC1450 - Router NETGEAR - Free user manual and instructions
Find the device manual for free AC1450 NETGEAR in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wireless Router |
| Model | AC1450 |
| Brand | Netgear |
| Wireless Standards | IEEE 802.11 a/b/g/n/ac |
| Frequency Bands | Dual-band (2.4 GHz + 5 GHz) |
| Maximum Speed | Up to 450 Mbps (2.4 GHz) + up to 1450 Mbps (5 GHz) |
| Ports | 4x Gigabit Ethernet LAN, 1x Gigabit Ethernet WAN, 1x USB 2.0 |
| Antennas | 3 external (fixed) |
| Dimensions (W x D x H) | 240 x 165 x 38 mm |
| Weight | 0.5 kg |
| Power Supply | 12V DC, 1.5A |
| Security | WPA/WPA2, WEP, Firewall (SPI, NAT), Guest network |
| Management | Web-based interface, Netgear Genie app |
| Quality of Service (QoS) | Yes, WMM, prioritization |
| VPN Support | Yes (PPTP, IPSec, L2TP pass-through) |
| Warranty | 1 year limited |
| Cleaning | Wipe with a soft, dry cloth. Do not use liquid cleaners. |
| Repair & Parts | No user-serviceable parts. Contact Netgear support for repair options. |
Frequently Asked Questions - AC1450 NETGEAR
How do I set up my Netgear AC1450 router?
Connect the router to your modem via the WAN port, power it on, and open a browser to routerlogin.net. Follow the on-screen setup wizard or use the Netgear Genie app.
What is the default username and password?
The default username is admin and password is password (case-sensitive). It is strongly recommended to change these during initial setup.
How do I change my WiFi password?
Log in to the router's web interface, go to Wireless settings, and update the Security Key or Passphrase. Save settings and reboot if prompted.
How can I update the firmware on my AC1450?
In the admin interface, navigate to Administration > Firmware Update. Check for updates online or manually upload a firmware file from Netgear support.
Why is my internet connection slow?
Check for interference from other devices, try switching to the 5 GHz band, update firmware, or run a speed test. Also ensure QoS settings are optimized.
How do I reset my router to factory defaults?
Press and hold the Reset button on the back for 10 seconds using a paperclip, until the power LED blinks. All settings will be erased.
Can I use the USB port for printer sharing?
Yes, the USB 2.0 port supports printer sharing via the ReadySHARE Printer utility. Connect the printer and install the software from Netgear's website.
How do I enable guest Wi-Fi?
In the wireless settings, enable Guest Network. You can set a separate SSID and security key, and restrict access to the local network.
What should I do if I forget my router login password?
Perform a factory reset using the Reset button. This will restore default credentials and all settings.
How do I troubleshoot intermittent disconnections?
Ensure the router is ventilated, update firmware, change WiFi channel to avoid congestion, and check for interference from nearby electronics.
User questions about AC1450 NETGEAR
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Router in PDF format for free! Find your manual AC1450 - NETGEAR and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AC1450 by NETGEAR.