00111980 - Motion detector Xavax - Free user manual and instructions

Product Type	Motion Detector (Motion Alarm Sensor)
Brand	Xavax
Model	00111980
Power Supply	9V alkaline battery (1x)
Battery Type	9V block battery
Operating Frequency	868.35 MHz
Detection Angle	< 110°
Detection Range (High)	Up to 15 m
Detection Range (Medium)	Up to 6 m
Detection Range (Low)	Up to 4 m
Mounting	Wall mount (assembly kit included)
Battery Low Indicator	Red LED flashing slowly
Compatibility	Central alarm system (model 20111977)
Material	Plastic
Maintenance	Clean with slightly damp, lint-free cloth; no aggressive cleaners
Certifications	CE
Package Contents	Motion detector, assembly kit, holder, operating instructions
Warranty	See Hama GmbH & Co. KG terms
Intended Use	Private, non-commercial indoor use

Frequently Asked Questions - 00111980 Xavax

How do I install the motion detector?

Refer to the operating instructions of the central alarm system (model 20111977) for detailed installation and setup. This manual provides basic startup instructions. Use the included assembly kit for wall mounting.

How do I change the battery?

Remove the battery cover, insert a new 9V alkaline battery with correct polarity (+ and -), then close the cover. Use one 9V battery.

What is the detection range?

The detection range varies by sensitivity setting: high up to 15 m, medium up to 6 m, low up to 4 m. The detection angle is < 110°.

Why is the red LED flashing?

The red LED on the transmitter flashes slowly when the batteries need to be replaced. Replace the battery promptly.

Can the motion detector be used outdoors?

No, the product is intended for private, non-commercial indoor use only. Protect it from dirt, moisture, and overheating.

Is this motion detector compatible with other alarm systems?

This motion detector is designed as an accessory for the central alarm system model 20111977 from Xavax. Compatibility with other systems is not guaranteed.

How do I clean the motion detector?

Clean only with a slightly damp, lint-free cloth. Do not use aggressive cleaning agents and ensure no water enters the device.

What type of battery does it use?

It requires one 9V alkaline battery (also known as a 9V block battery). Do not attempt to charge non-rechargeable batteries.

How do I pair the motion detector with the central alarm system?

Pairing instructions are provided in the operating manual of the central alarm system (20111977). This motion detector manual only covers basic startup.

What does the red LED indicate?

The red LED on the transmitter flashes slowly to indicate that the battery is low and needs replacement. Replace the battery to ensure proper function.

USER MANUAL 00111980 Xavax

Distributed by Hama GmbH & Co KG 86652 Monheim/Germany [phone] www.xavax.eu

00111980/06 15

Pure mechanical assembly diagram without any text, numbers, or symbols

All listed brands are trademarks of the corresponding companies. Errors and omissions excepted, and subject to technical changes. Our general terms of delivery and payment are applied.

GB Operating instruction

Thank you for choosing a Xavax product. Take your time and read the following instructions and information completely. Please use these instructions in a safe place for future reference. If you sell the device, please past these operating instructions on to the new owner.

1. Explanation of Warning Symbols and Notes

Warnings

symbol is used to indicate safety instructions or to draw your attention to specific and risks.

Note

This symbol is used to indicate additional information or important notes.

2. Package Contents

• Motion detec

- Assembly kit - Vickers for moving the police driver at the wall

- Holder for mounting the top - There operating instructions

3. Safety Notes

• The product is intended for private, non-commercial use only

- Protect the product from dirt, moisture and overheating, and only use it in a dry environment.

- Do not drop the product and do not expose it to any major shocks.

- Do not modify the product in any way. Doing so voids the warranty.

- Do not open the product. Do not continue to operate the product if it is damaged, which may be indicated by smoke, odour or loud noises. Immediately contact your dealer or our service department (see item "Service and Support").

Warning - Batteries

• Never open, damage or swallow batteries or allow them to enter the environment. They can contain toxic, environmentally unfriendly heavy metals. Zieflendien The Aikou/Battenen nicht.
• Do not allow batteries/chargeable batteries to discharge completely.
• Do not tamper with or damage/heat/dry assemble the batteries/rechargeable batteries.
• Do not short circuit the batteries/chargeable batteries and keep them away from
  uncosated metal objects
• Only use batteries (or rechargeable batteries) that match the specified type.
• Do not attempt to charge non-rechargeable batteries, as they may explode.
• When inserting batteries, note the correct polarity (+ and - markings) and insert the
  batteries accordingly. Failure to do so could result in the batteries leading or exploding

4. Getting Started

Note - Please refer to the operating instructions of the central alarm system.

• These operation instructions only explain how to start up the motion alarm sensor, which is an accessory of the central alarm system (20111977).

- Please observe the instructions and information about installing and operating the motion alarm sensor in the operating instructions of the central alarm system (Sec. 6 and 7 in those instructions).

- Remove the battery cover and insert new batteries. Ensure that the polarity is correct (see figure). Close the battery cover. (Requires 1 x 9 V battery.)

- Battery display: the red LED on the transmitter flashes slowly when the batteries need to be replaced.

5. Care and Maintenance

Only clean this product with a slightly damp, lint-free cloth and do not use aggressive cleaning agents. Make sure that water does not get into the product.

6. Warranty Disclaimer

Hama GmbH & Co. KG assumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product or from failure to observe the operating instructions and/or safety notes.

7. Service and Support

Please contact Hama Product Consulting if you have any questions about this product. Hotline: [phone] (German/English) Further support information can be found here: www.xavax.eu

1. Technical Data

	Magnet Alum Sensor
Supply voltage	9V Alkaline-Battery (1s)
Operating frequency	86K, 35 MHz +/- 0.5 MHz
Detection angle	< 110°
Detection Zone	H^ < 15M, M^ < 6M, L^ < 4M
Building code	4-pin Juniper
Zone code	8-pin Juniper

9. Recycling Information

Note on environmental protection:

After the implementation of the European Directive 2002/96/EU and 2006/66/EU in the national legal system, the following applies: Electric and electronic devices as well as batteries must not be disposed of with household waste. Consumers are obliged by law to return electrical and electronic devices as well as batteries at the end of their service lives to the public collecting points set up for this purpose or

point of sale. Details to this are defined by the national law of the respective country. This symbol on the product, the instruction manual or the package indicates that a product is subject to these regulations. By recycling, revising the materials or other forms of utilising old devices/illatteries, you are making an important contribution to protecting our environment.

10. Declaration of Conformity

CE Hereby, Hama GmbH & Co. KG, declares that 00106834 is in compliance with the essential requirements and other relevant provisions of Directive 1999/SIEC.

See www.nama.com for declaration of conformity according to KBITE Directive 93/SIEC guidelines.

Mode d'emploi

starrled yet Ets capt. by 7 of a France.