MD20F51 - Television TOSHIBA - Free user manual and instructions
Find the device manual for free MD20F51 TOSHIBA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | CRT Television |
| Brand | Toshiba |
| Model | MD20F51 |
| Screen Size | 20 inches (diagonal) |
| Display Technology | CRT (Cathode Ray Tube) |
| Aspect Ratio | 4:3 |
| Resolution | 640 x 480 (NTSC) |
| Inputs | RF Antenna, Composite Video (RCA), Audio L/R |
| Audio Output | Built-in speaker, Headphone jack (3.5mm) |
| Power Consumption | Approx. 75 W |
| Power Supply | AC 120V, 60 Hz |
| Weight | Approx. 25 lbs (11.3 kg) |
| Dimensions (W x H x D) | 20.5 x 18.2 x 18.7 inches (52 x 46 x 47 cm) |
| Remote Control | Included (CRT-20 compatible) |
| Features | Sleep timer, Channel memory, Closed captioning |
| Safety | UL Listed |
| Cleaning | Use a soft dry cloth; do not use liquids |
| Repairability | Refer to service manual for parts |
Frequently Asked Questions - MD20F51 TOSHIBA
How do I connect an external device like a DVD player?
Use the composite video (yellow) and audio (red/white) inputs on the back of the TV. Connect the corresponding cables from your device.
If your device uses RF, connect to the ANT input.
If your device uses RF, connect to the ANT input.
Why is there no picture but sound?
Check if the TV is set to the correct input source. Press the INPUT button on the remote to cycle through sources. Also ensure the video cable is properly connected.
Why is there no sound?
Verify volume is up and not muted. Check audio cables from external devices. If using RF, ensure the audio signal is present. Try headphones to isolate speaker issue.
The remote control is not working. What should I do?
First, replace the batteries. If still not working, check for obstructions between remote and TV sensor. Try pointing directly at the TV. If issues persist, the remote may need replacement.
How do I set the sleep timer?
Press the SLEEP button on the remote repeatedly to select time intervals (15, 30, 60, 90 minutes). The TV will turn off automatically when the timer ends.
How do I clean the TV screen?
Use a soft, dry cloth. Do not apply any liquid or cleaning agents directly to the screen. If needed, slightly dampen the cloth with water, but ensure it is not wet.
Can I connect a modern HD device?
This TV is standard definition (480i). HD devices will work if they have composite or RF output, but picture quality will be limited to SD resolution. No HDMI input is available.
How do I reset the TV to factory settings?
Press MENU on the remote, navigate to Setup or Preferences, and select Factory Reset. Confirm with OK. This erases all custom settings.
Where can I find the user manual?
The user manual is available for free download on notice-facile.com. Search for Toshiba MD20F51.
Is this TV compatible with a universal remote?
Yes, many universal remotes support Toshiba TVs. Look for code 10178 or search for Toshiba 2-digit codes. Follow the remote's programming instructions.
User questions about MD20F51 TOSHIBA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Television in PDF format for free! Find your manual MD20F51 - TOSHIBA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MD20F51 by TOSHIBA.