HW7ACW - Access Point Hawking Technologies - Free user manual and instructions
Find the device manual for free HW7ACW Hawking Technologies in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wireless Access Point |
| Brand | Hawking Technologies |
| Model | HW7ACW |
| Wireless Standard | IEEE 802.11ac, IEEE 802.11a/b/g/n |
| Frequency Band | 2.4 GHz & 5 GHz (Dual-band) |
| Maximum Data Rate | Up to 1200 Mbps (300 Mbps on 2.4 GHz + 867 Mbps on 5 GHz) |
| Ethernet Ports | 1 x Gigabit Ethernet (10/100/1000) PoE |
| Antenna Type | Internal (Omnidirectional) |
| Power Supply | PoE (Power over Ethernet) or 12V DC adapter (included) |
| Dimensions (W x D x H) | 160 mm x 110 mm x 35 mm |
| Weight | 250 g |
| Security | WPA2-PSK, WPA3-PSK, WEP, MAC address filtering |
| Operating Modes | Access Point, Repeater, WDS, Client Bridge |
| Management | Web-based GUI (HTTP/HTTPS), SNMP v1/v2c |
| Power Consumption | Maximum 10W |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Humidity | 10% to 90% non-condensing |
| Mounting | Wall-mountable (bracket included) or desktop |
| Cleaning Instructions | Wipe with a soft dry cloth. Do not use liquid cleaners. |
| Safety | FCC, CE, RoHS compliant |
| Spare Parts & Repairability | No user-serviceable parts. Contact support for repairs. |
| Package Contents | Access point, PoE injector, mounting kit, quick start guide |
Frequently Asked Questions - HW7ACW Hawking Technologies
How do I reset the Hawking HW7ACW to factory defaults?
Locate the reset button on the back panel. Using a paperclip, press and hold the button for 10 seconds until the LEDs flash. The device will reboot with default settings.
What is the default IP address and login credentials?
The default IP is 192.168.1.100. Username: admin, Password: admin (or left blank). Refer to the manual for exact defaults.
Can I use the HW7ACW as a WiFi repeater?
Yes. Through the web interface, select 'Repeater' mode and scan for the existing network. Enter the SSID and password to extend coverage.
Does this access point support Power over Ethernet?
Yes, the HW7ACW supports 802.3af PoE. Use a PoE switch or the included injector for power and data over a single Ethernet cable.
How can I improve the wireless range?
Place the access point centrally, away from obstructions and electronic interference. Ensure antennas (if external) are oriented properly. Consider using WDS or additional units.
What security modes are available?
The HW7ACW supports WPA2-PSK, WPA3-PSK, and legacy WEP. It also offers MAC address filtering and disable SSID broadcast.
How do I update the firmware?
Download the latest firmware from Hawking's support site. Log into the web GUI, go to 'Administration' > 'Firmware Upgrade', select the file, and click Upgrade. Do not power off during update.
Can I mount this access point on a wall?
Yes. The package includes a wall-mounting bracket and screws. Secure the bracket to the wall, then slide the access point onto it until it clicks.
What is the maximum number of connected devices?
The HW7ACW can handle up to 128 simultaneous clients under typical conditions, though performance may vary based on traffic and environment.
Does the HW7ACW support guest networks?
Yes. Through the web interface, you can enable a guest network with separate SSID and isolation from the main network. This feature is found under 'Wireless' > 'Guest Network'.
User questions about HW7ACW Hawking Technologies
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Access Point in PDF format for free! Find your manual HW7ACW - Hawking Technologies and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HW7ACW by Hawking Technologies.