OMNI Premium - Headphones JLab - Free user manual and instructions
Find the device manual for free OMNI Premium JLab in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Over-Ear Wireless Headphones |
| Brand | JLab |
| Model | OMNI Premium |
| Driver Size | 40mm |
| Frequency Response | 20Hz – 20kHz |
| Impedance | 32Ω |
| Connectivity | Bluetooth 5.0 |
| Wireless Range | Up to 10m / 33ft |
| Battery Type | Rechargeable Lithium-ion |
| Battery Life | Up to 35 hours |
| Charging Time | Approximately 2 hours |
| Charging Port | USB-C |
| Microphone | Built-in with noise cancellation |
| Controls | On-ear controls (volume, track, call, voice assistant) |
| Audio Codecs | SBC, AAC |
| Weight | Approximately 250g |
| Dimensions | 7.5 x 6.5 x 3.5 inches (folded) |
| Foldable Design | Yes, for portability |
| Ear Cushion Material | Memory foam with leatherette |
| Water Resistance | IPX4 (sweat and splash resistant) |
| What's in the Box | Headphones, USB-C charging cable, 3.5mm audio cable, carrying case, user manual |
Frequently Asked Questions - OMNI Premium JLab
How do I pair the JLab OMNI Premium with my phone?
Turn on the headphones by holding the power button for 3 seconds until the LED flashes blue. On your phone, enable Bluetooth and select JLab OMNI Premium from the available devices. If prompted, enter 0000 as the PIN.
How long does the battery last and how do I charge it?
The battery lasts up to 35 hours on a full charge. Use the included USB-C cable to charge; a full charge takes approximately 2 hours. The LED turns solid when fully charged.
Can I use the headphones while charging?
Yes, you can use the headphones in wired mode (via the included 3.5mm audio cable) while charging, but wireless playback is not possible during charging.
How do I reset the headphones?
To reset, press and hold the power button and volume up button simultaneously for 10 seconds until the LED flashes red and blue. The headphones will power off and reset to factory settings.
Are the earcups replaceable or washable?
The ear cushions are not washable but can be wiped clean with a damp cloth. They are not designed to be replaced by the user; contact JLab support for replacement options.
Does the OMNI Premium have active noise cancellation?
No, the OMNI Premium does not feature active noise cancellation. However, the over-ear design provides passive noise isolation by covering the ears.
Can I connect the headphones to a PC or gaming console?
Yes, you can connect via the included 3.5mm audio cable for wired use on PCs, consoles, or any device with a headphone jack. Wireless Bluetooth is also available for PCs with Bluetooth.
How do I use the built-in microphone for calls?
During a call, the microphone activates automatically. Use the multifunction button to answer/end calls. Press and hold to reject a call or activate voice assistant.
What should I do if the headphones won't turn on?
First, charge the headphones for at least 30 minutes. If they still don't turn on, try resetting by holding power and volume up for 10 seconds. If the problem persists, contact JLab support.
Is the OMNI Premium compatible with voice assistants?
Yes, press and hold the multifunction button for 2 seconds to activate Siri, Google Assistant, or other voice assistants on your paired device.
User questions about OMNI Premium JLab
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Headphones in PDF format for free! Find your manual OMNI Premium - JLab and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. OMNI Premium by JLab.