IW840 - Pregnant OSD Audio - Free user manual and instructions
Find the device manual for free IW840 OSD Audio in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | In-wall speaker |
| Brand | OSD Audio |
| Model | IW840 |
| Woofer Size | 8 inches polypropylene cone |
| Tweeter Size | 1 inch silk dome |
| Frequency Response | 40 Hz - 20 kHz |
| Impedance | 8 ohms |
| Sensitivity | 90 dB (2.83V/1m) |
| Power Handling | 100W RMS / 200W peak |
| Dimensions (H x W x D) | 12.5 x 8.5 x 3.75 inches |
| Cutout Dimensions | 11.0 x 7.0 inches |
| Weight | 5.2 lbs |
| Mounting Type | Dog-ear clamps |
| Grille | Paintable, magnetic or snap-fit |
| Color | White (paintable) |
| Recommended Amplifier Power | 20 - 100W per channel |
| Cleaning Instructions | Wipe with dry cloth; do not use liquids |
| Safety | No special safety precautions required |
| Spare Parts Availability | Contact OSD Audio for replacement parts |
| Warranty | Limited lifetime warranty |
Frequently Asked Questions - IW840 OSD Audio
What is the recommended amplifier power for the OSD Audio IW840?
The IW840 is rated for 100W RMS and handles up to 200W peak. An amplifier delivering 20 to 100W RMS per channel is recommended for optimal performance.
Can I paint the grille of the IW840 to match my wall?
Yes, the grille is paintable. Use thin, water-based paint and avoid clogging the holes. Remove the grille before painting for best results.
What are the cutout dimensions for the IW840?
The required cutout size is approximately 11.0 x 7.0 inches. Ensure the wall cavity has at least 3.5 inches of depth.
Does the IW840 come with a mounting template?
Yes, a paper template is included for accurate cutout marking. You can also download a template from the OSD Audio website.
Is the IW840 suitable for use in bathrooms or outdoor covered areas?
The IW840 is designed for indoor dry locations. It is not moisture-rated, so avoid installation in high-humidity areas.
What type of speakers are the IW840?
The IW840 is a 2-way in-wall speaker with an 8-inch woofer and a 1-inch silk dome tweeter, producing full-range sound.
Can I use the IW840 with a surround sound receiver?
Yes, the IW840 is compatible with most AV receivers. Its 8-ohm impedance and high sensitivity make it easy to drive.
How do I clean the IW840 grille?
Use a soft brush or vacuum with a brush attachment to remove dust. For deeper cleaning, gently wipe with a damp cloth and dry immediately.
What is the frequency response of the IW840?
The IW840 delivers a frequency response of 40 Hz to 20 kHz, providing deep bass and clear highs for music and movies.
Are replacement parts available for the IW840?
Yes, OSD Audio offers replacement parts such as tweeters and woofers. Contact their customer service for ordering information.
User questions about IW840 OSD Audio
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Pregnant in PDF format for free! Find your manual IW840 - OSD Audio and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. IW840 by OSD Audio.