CVR800 - Car stereo PHILIPS - Free user manual and instructions
Find the device manual for free CVR800 PHILIPS in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Car Stereo / Autoradio |
| Brand | Philips |
| Model | CVR800 |
| Dimensions (approx.) | 1 DIN (178mm x 50mm x 160mm) |
| Weight (approx.) | 0.5 kg |
| Power Supply | 12V DC (negative ground) |
| Max Power Output | 4 x 50W |
| Radio Tuner | FM/AM with RDS |
| Media Playback | CD, CD-R, CD-RW |
| Connectivity | USB, Auxiliary input (3.5mm), Antenna |
| Audio Features | Preset equalizer, Bass/Treble control, Loudness |
| Display | LCD with white illumination |
| Clock | 12/24 hour adjustable |
| Anti-Theft | Detachable front panel |
| Fuse | 10A blade fuse (included) |
| Maintenance | Clean with soft dry cloth; avoid liquids |
| Safety | Reverse polarity protection, fuse protection |
| Repair Service | Contact Philips authorized service center |
Frequently Asked Questions - CVR800 PHILIPS
How do I install the Philips CVR800 car stereo?
First, disconnect the car battery negative terminal. Remove the existing stereo, connect the wiring harness (ISO connector) matching colors: red (ignition), yellow (constant 12V), black (ground), and speaker wires. Slide the stereo into the DIN slot and secure with the provided screws. Reconnect battery and test.
How do I connect speakers to the CVR800?
The speaker wires are color-coded: white (front left), gray (front right), green (rear left), violet (rear right). Each pair has a solid color for positive and a stripe for negative. Connect them to corresponding speakers, ensuring proper polarity for best sound.
How to set the clock on the CVR800?
Press the CLK button (or hold) until the hour digits flash. Turn the rotary knob to adjust hours, then press again to set minutes. Turn knob to set minutes, and press CLK to confirm.
How do I tune radio stations?
Press SOURCE to select radio. Use the SEEK + or - buttons to auto-scan for strong stations. To manually tune, hold the button. To store a station, hold a preset button (1-6) until it beeps.
Can I play music from a USB drive?
Yes, insert a USB drive with MP3/WMA files into the USB port. The stereo will auto-detect and start playback. Use the controls to navigate folders or tracks. Maximum supported capacity is 32GB.
How do I reset the Philips CVR800?
If the stereo malfunctions, press the RESET button (usually on the front panel with a small pin) using a pointed object. This restores factory settings. Alternatively, disconnect the vehicle battery for 10 minutes.
Why is there no sound from my speakers?
Check if the volume is turned up. Ensure the speaker wires are properly connected and not shorted. Verify the stereo is not muted. Also check the fuse; a blown fuse can cut power to the amplifier.
How do I remove the detachable faceplate?
Press the RELEASE button on the front panel. The faceplate will pop out slightly. Pull it off gently. To reattach, align the clips and push until it clicks. Always remove the faceplate when leaving the car to deter theft.
How to adjust the equalizer?
Press the EQ button to cycle through preset modes (Rock, Pop, Jazz, Classic, etc.). For custom settings, press and hold EQ, then adjust bass and treble with the rotary knob. Press EQ again to exit.
What is the correct fuse rating for the CVR800?
Use a standard 10A blade fuse. If the fuse blows, replace it with the same rating. Using a higher rating can damage the stereo or cause fire. The fuse is located on the power wire near the stereo.
User questions about CVR800 PHILIPS
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Car stereo in PDF format for free! Find your manual CVR800 - PHILIPS and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CVR800 by PHILIPS.