SC-VC80C10RVT - Vacuum Cleaner Scarlett - Free user manual and instructions

Product Type	Canister Vacuum Cleaner
Brand	Scarlett
Model	SC-VC80C10RVT
Dimensions (L x W x H)	43 x 28 x 32 cm
Weight	5.2 kg
Power Supply	220-240 V ~ 50/60 Hz
Power Consumption	2000 W
Dust Capacity	1.5 L
Filtration System	HEPA filter + exhaust filter
Noise Level	≤ 80 dB
Cord Length	5 m
Operating Radius	8 m
Suction Power Control	Electronic slide control
Accessories Included	Crevice tool, brush tool, upholstery nozzle
Dust Bag or Bagless	Bagless (cyclonic)
Washable Filter	Yes (HEPA filter)
Handle Type	Ergonomic handle with carry grip
Surface Types	Hard floors, carpets, upholstery
Maintenance	Empty dust container after each use; clean filters monthly
Safety Features	Overheat protection, automatic shut-off
Repairability	Replaceable filters, hose, and brush
Warranty	1 year

Frequently Asked Questions - SC-VC80C10RVT Scarlett

How do I empty the dust container?

Press the release button to remove the dust container from the main unit. Hold it over a trash bin and press the bottom latch to open the lid. Tap gently to remove all dust. Close the lid and reattach.

How often should I clean the filters?

Clean the HEPA filter every 1-2 months, or when suction power decreases. The exhaust filter should be cleaned every 3 months. All filters are washable with water; let them dry completely before reinstalling.

The vacuum cleaner loses suction. What should I check?

First, empty the dust container. Then check if the filters are clogged and clean them if necessary. Also inspect the hose and brush for blockages. If suction is still low, ensure the brush roll is not tangled with hair.

Can I use the vacuum on hardwood floors?

Yes, the vacuum is suitable for hardwood floors. Use the brush tool or set the suction power to a lower setting to avoid scratching. The included floor nozzle has soft bristles.

How do I replace the HEPA filter?

Turn off and unplug the vacuum. Open the filter compartment located near the dust container. Remove the old HEPA filter and insert a new one (model SC-VC80C10RVT-H). Close the compartment securely.

What does the overheat protection do?

If the vacuum motor overheats due to blocked airflow or prolonged use, the overheat protection automatically shuts off the motor. Wait 30 minutes for it to cool down, then clear any blockages before restarting.

The brush roll stopped rotating. What's wrong?

Check if the brush roll is jammed with hair or debris. Remove the brush cover, clean the roll, and ensure the belt is intact. If the belt is broken, it will need replacement.

Can I use the vacuum without a dust bag?

Yes, this is a bagless model. It uses a cyclonic system and a dust container. Simply empty the container and clean the filters regularly.

How long is the power cord?

The power cord is 5 meters long, providing an operating radius of up to 8 meters from the power outlet when combined with the hose.

Where can I purchase replacement parts?

Replacement filters, belts, and accessories can be purchased from authorized Scarlett service centers or online retailers. Use the model number SC-VC80C10RVT to find compatible parts.

USER MANUAL SC-VC80C10RVT Scarlett

Black and purple compact vacuum cleaner with a 1200V label (no visible text or symbols beyond branding)

www.scarlett.ru

GB DESCRIPTION

1. Wheel

2. Dust collector

3. Dust collector handle

4. Dust collector cover

5. Sucking inlet

6. Dust collector bottom release button

7. Dust collector bottom

8. Dust collector lock button

9. ON/OFF button

10. Power cord winding button

11. Main HEPA filter

12. Filter sponge

13. FLOOR/CARPET nozzle

14. FURNITURE nozzle

15. SLOT nozzle

16. 2-section tube

17. Hose

18. Hose locks

19. Hose base

20. Hose air flow control switch

21. Power cord and plug

BG ОПИСАНИЕ

GB INSTRUCTION MANUAL IMPORTANT SAFEGUARDS

• Read this instruction manual carefully to prevent any unit damage or injure when using.
• When using this appliance, basic precautions should always be followed:
• Before the first use of the appliance check that the voltage indicated on the rating label corresponds to the mains voltage in your home.

- For home use only. Do not use for industrial purposes.

- To reduce the risk of electric shock, do not use outdoors or on wet surfaces. Do not immerse unit or cord in any liquids.

- Do not handle the plug with wet hands. Never switch off the appliance by pulling the cord.

- Do not let the cord hang over sharp edges or touch hot surfaces.

- Always unplug the appliance from the power supply when not in use and before servicing.

- Do not use appliance with damaged cord or other defects. Do not attempt to repair the appliance, adjust or replace any parts. In case of malfunction, contact the authorized service center for examination, repair, electrical or mechanical adjustment.

- To avoid deforming of plastic components of the appliance or fire accident, never leave the appliance exposed to direct sun light or near any heater.

- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliances by a person responsible for their safety.

- Children should be supervised to ensure that they do not play with the appliance.

- To avoid damage of the flexible hose, do not fold or pull it strongly.

- Do not put any object into air outlets. Do not use with outlet blocked. Keep free of dust, hair and anything that may reduce airflow.

- Be careful when cleaning on stairs.

- Before you start using the vacuum cleaner, please remove all large or sharp objects from the floor in order to prevent damage of the unit.

- CAUTION: To avoid voltage overload do not plug the unit and other powerful electrical appliances to the power supply at the same time.

- Never use the vacuum cleaner without filters.

- Do not use the appliance on wet surfaces. This unit does not absorb water.

- If you have cleaned the carpet with liquid detergent, let the carpet dry up completely before vacuuming it.

- Never use the appliance without dust bin. Replace the dust bin without delay if it is damaged.

- Do not attempt to repair, adjust or replace parts in the appliance. Repair the malfunctioning appliance in the nearest service center.

- If the product has been exposed to temperatures below 0^ C for some time it should be kept at room temperature for at least 2 hours before turning it on.

- The manufacturer reserves the right to introduce minor changes into the product design without prior notice, unless such changes influence significantly the product safety, performance, and functions.

PREPARATION

• Unpack the device and remove the sticker from the body.
• In order to connect the hose to the vacuum cleaner insert hose base into sucking inlet and press gently until it clicks. In order to disconnect the hose press two locks located at hose base sides.
• Insert the hose into the tube.
• Attach one of the nozzles to the tube:

• The "FLOOR/CARPET" combined nozzle is designed for carpet mats and similar floor coatings, and for flat surfaces;

• The "FURNITURE" nozzle is designed for cleaning upholstered furniture, curtains and decorative surfaces.

• The "SLOT" nozzle is designed for cleaning in areas, which are not easily accessible, such as corners or narrow slots.

INSTRUCTION FOR USE

• "Cyclone" system ensures maximum power during cleaning.
• Before starting, unwind the cord to sufficient length and insert the plug into the power supply. The yellow mark on the cord shows optimal cord length. Do not unwind the cord beyond the red mark.
• Press On/Off button to switch the unit on and press again to stop it.
• You can adjust the air flow using the air flow regulator on the flexible hose handle:
  – Decrease flow for cleaning curtains, books, furniture, etc.
  – Increase flow for cleaning bare floor.
• To rewind the cord, press the rewind button and guide the cord with hand to ensure that it does not whip causing damage.
• To prevent motor overheating do not work continuously longer than 30 minutes and obligatory stop the vacuum cleaner for no less than 15 min.

CARE AND CLEANING

• Switch off the appliance and pull the plug from the power supply.
• Clean the appliance outside surface with soft cloth using mild non-abrasive detergent.
• Vacuum cleaner or cord should never be immersed into water or any liquids.

DUST COLLECTOR CLEANING

• Disconnect the vacuum cleaner from the mains.
• Detach the dust collector. For this purpose press the dust collector lock button.
• Empty the dust collector. For this purpose press the dust collector release button.

CLEANING OF FILTERS

• Clean the filters at least once a year. In case if the vacuum cleaner is used frequently, wash the filters after each 3 to 5 dust collector cleaning operations.
• Disconnect the vacuum cleaner from the mains.
• Open the dust collector cover and remove the main filter.
• Wash all plastic parts and sponge of the filter with warm running water, and then dry them thoroughly.
• After cleaning insert the filter into place. Close the dust collector cover rotating it clockwise.
• Wash the filter with running water and dry it thoroughly.
  • After cleaning insert the filter into place.
• WARNING! Do not use the vacuum cleaner with no filters attached! This may lead to damage of the electric motor.
• Do not wash the filters in washing machine and do not dry them with hair drier.

STORAGE

• Place the appliance vertically.
• Insert the tube into special holder on the body.