SC-VC80C11 - Vacuum Cleaner Scarlett - Free user manual and instructions

Product Type	Upright Vacuum Cleaner
Model Number	SC-VC80C11
Brand	Scarlett
Dimensions (L x W x H)	25 x 20 x 110 cm
Weight	4.0 kg
Power Supply	220-240 V ~ 50/60 Hz
Power Consumption	700 W
Dust Capacity	0.8 L
Filtration System	Cyclonic + HEPA filter
Bagless	Yes
Cord Length	5 m
Suction Power Control	Variable (2 levels)
Brush Roll	Yes, with on/off switch
Accessories Included	Crevice tool, dusting brush, upholstery tool
Noise Level	78 dB(A)
Maintenance	Clean dust container and filter regularly; replace HEPA filter every 6 months
Safety Features	Thermal overload protection, automatic shut-off if blocked
Spare Parts Availability	Filters, brush rolls, accessories available from Scarlett service centers
Repairability Index	5.5 / 10 (estimated)
Warranty	1 year

Frequently Asked Questions - SC-VC80C11 Scarlett

How do I assemble the vacuum cleaner?

Insert the handle into the main body until it clicks. Attach the floor nozzle and select the desired tool. Refer to the manual for detailed steps.

How often should I empty the dust container?

Empty the dust container when the debris reaches the "MAX" mark, or after each use for best performance.

How do I clean the filter?

Turn off and unplug the vacuum. Remove the filter and tap it gently to remove dust. If heavily soiled, wash with warm water (no soap) and let it dry completely for 24 hours before reinserting.

The vacuum has lost suction. What should I check?

Check if the dust container is full. Clean or replace the filter. Inspect the hose and brush roll for blockages. Ensure the brush roll is not tangled with hair or debris.

Can I use the vacuum without a bag?

Yes, this model is bagless. The dust collects in a transparent container that you empty directly.

How do I replace the brush roll?

Unplug the vacuum. Turn the vacuum over and remove the bottom plate screws. Lift out the old brush roll and slide in the new one. Reattach the bottom plate.

The vacuum overheats and shuts off. What should I do?

This is a safety feature. Turn off and unplug. Check for blockages in the hose or filter. Allow the vacuum to cool for 30 minutes before restarting.

Can I use the vacuum on hard floors?

Yes, this vacuum has a brush roll on/off switch. Turn off the brush roll for hard floors to avoid scratches. The included crevice tool is also suitable for edges.

Where can I purchase spare parts?

Spare parts such as filters, brush rolls, and nozzles are available from authorized Scarlett service centers or online through the official website.

How do I store the vacuum cleaner?

Store the vacuum in a dry place. Wind the cord around the cord hooks. Keep the nozzle and tools attached or in a separate compartment to prevent loss.

USER MANUAL SC-VC80C11 Scarlett

Red and black vacuum cleaner with coiled black hose, no visible text or symbols

www.scarlett.ru

GB DESCRIPTION

1. Wheel
2. Dust collector
3. Dust collector handle
4. Dust collector cover
5. Sucking inlet
6. Dust collector bottom release button
7. Dust collector bottom
8. Dust collector lock button
9. ON/OFF button
10. Power cord winding button
11. Main HEPA filter
12. Floor-carpet nozzle
13. Furniture-crevice nozzle
14. 2-section tube
15. Hose
16. Hose locks
17. Hose base
18. Hose air flow control switch
19. Power cord and plug
20. Outlet-sponge filter

CB INSTRUCTION MANUAL IMPORTANT SAFEGUARDS

• Read this instruction manual carefully to prevent any unit damage or injure when using.
• When using this appliance, basic precautions should always be followed:
• Before the first use of the appliance check that the voltage indicated on the rating label corresponds to the mains voltage in your home.

- For home use only. Do not use for industrial purposes.

- To reduce the risk of electric shock, do not use outdoors or on wet surfaces. Do not immerse unit or cord in any liquids.

- To prevent risk of electric shock and fire, do not immerse the appliance in water or any other liquids. If it has happened DO NOT TOUCH the appliance, unplug it immediately and check in a service center.

- Do not handle the plug with wet hands. Never switch off the appliance by pulling the cord.

- Do not let the cord hang over sharp edges or touch hot surfaces.

- Always unplug the appliance from the power supply when not in use and before servicing.

- Do not use appliance with damaged cord or other defects. Do not attempt to repair the appliance, adjust or replace any parts. In case of malfunction, contact the authorized service center for examination, repair, electrical or mechanical adjustment.

- To avoid deforming of plastic components of the appliance or fire accident, never leave the appliance exposed to direct sun light or near any heater.

- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliances by a person responsible for their safety.

- Children should be supervised to ensure that they do not play with the appliance.

- To avoid damage of the flexible hose, do not fold or pull it strongly.

- Do not put any object into air outlets. Do not use with outlet blocked. Keep free of dust, hair and anything that may reduce airflow.

- Be careful when cleaning on stairs.

- Before you start using the vacuum cleaner, please remove all large or sharp objects from the floor in order to prevent damage of the unit.

- CAUTION: To avoid voltage overload do not plug the unit and other powerful electrical appliances to the power supply at the same time.

- Never use the vacuum cleaner without filters.

- Do not use the appliance on wet surfaces. This unit does not absorb water.

- If you have cleaned the carpet with liquid detergent, let the carpet dry up completely before vacuuming it.

- Never use the appliance without dust bin. Replace the dust bin without delay if it is damaged.

- Do not attempt to repair, adjust or replace parts in the appliance. Repair the malfunctioning appliance in the nearest service center.

- If the product has been exposed to temperatures below 0 °C for some time it should be kept at room temperature for at least 2 hours before turning it on.

- The manufacturer reserves the right to introduce minor changes into the product design without prior notice, unless such changes influence significantly the product safety, performance, and functions.

- Production date mentioned on the unit and/or on the packing materials and documentations.

PREPARATION

• Unpack the device and remove the sticker from the body.

• In order to connect the hose to the vacuum cleaner insert hose base into sucking inlet and press gently until it clicks. In order to disconnect the hose press two locks located at hose base sides.

• Insert the hose into the tube.

• Attach one of the nozzles to the tube:
• The "FLOOR/CARPET" combined nozzle is designed for carpet mats and similar floor coatings, and for flat surfaces;
• The "FURNITURE/SLOT" nozzle is designed for cleaning upholstered furniture, curtains and decorative surfaces.

INSTRUCTION FOR USE

- "Cyclone" system ensures maximum power during cleaning.

- Before starting, unwind the cord to sufficient length and insert the plug into the power supply. The yellow mark on the cord shows optimal cord length. Do not unwind the cord beyond the red mark.

- Press On/Off button to switch the unit on and press again to stop it.

- You can adjust the air flow using the air flow regulator on the flexible hose handle:

- Decrease flow for cleaning curtains, books, furniture, etc.

- Increase flow for cleaning bare floor.

- To rewind the cord, press the rewind button and guide the cord with hand to ensure that it does not whip causing damage.

- WARNING!

- Be sure to clean the container after each cleaning.

- Never use the vacuum cleaner without installed filter and with damaged or dirty filter. Otherwise, dust will fall into the motor and cause damage to the vacuum cleaner.

- Don't use the vacuum cleaner if the container is filled to the mark "MAX". When the container is filled, dirty air clogs up the vacuum cleaner filter and the engine can overheat and disable.

- Don't use the vacuum cleaner for cleaning of material debris such as cement, whitewash, plaster, metal shavings and etc. These particles cause to the engine damage.

- Don't wash vacuum cleaner parts in a dishwasher or a construction machine.

CARE AND CLEANING

• Switch off the appliance and pull the plug from the power supply.
• Clean the appliance outside surface with soft cloth using mild non-abrasive detergent.
• Vacuum cleaner or cord should never be immersed into water or any liquids.

DUST COLLECTOR CLEANING

- Disconnect the vacuum cleaner from the mains.

- Detach the dust collector. For this purpose press the dust collector lock button.

- Empty the dust collector. For this purpose press the dust collector release button.

CLEANING OF FILTERS

• Clean the filters at least once a year. In case if the vacuum cleaner is used frequently, wash the filters after each 3 to 5 dust collector cleaning operations.
• Disconnect the vacuum cleaner from the mains.
• Open the dust collector cover and remove the main filter.
• Wash all plastic parts and sponge of the filter with warm running water, and then dry them thoroughly.
• After cleaning insert the filter into place. Close the dust collector cover rotating it clockwise.

- Wash the filter with running water and dry it thoroughly.

• After cleaning insert the filter into place.

STORAGE

- Place the appliance vertically.

- Insert the tube into special holder on the body.

- The symbol on the unit, packing materials and/or documentations means used electrical and electronic units and battery's should not be toss in the garbage with ordinary household garbage. These units should be pass to special receiving point.

- For additional information about actual system of the garbage collection address to the local authority.

- Valid utilization will help to save valuable resources and avoid negative work on the public health and environment which happens with incorrect using garbage.