CPR5SA - Disk array Addonics - Free user manual and instructions
Find the device manual for free CPR5SA Addonics in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Disk Array / RAID Enclosure |
| Model | CPR5SA |
| Brand | Addonics |
| Number of Bays | 5 |
| Supported Drive Size | 3.5-inch SATA HDD/SSD |
| RAID Levels | RAID 0, 1, 5, 10, JBOD |
| Interface | eSATA, USB 3.0, FireWire 800 |
| Dimensions (W x H x D) | 19 x 5.2 x 12.6 inches (rackmount 2U) |
| Weight | 5.5 kg (12.1 lbs) |
| Power Supply | Internal 250W AC power supply |
| Input Voltage | 100-240 VAC, 50/60 Hz |
| Cooling | 1 x 80mm cooling fan |
| Hot-Swap Support | Yes, with tray-less design |
| LED Indicators | Power, HDD activity, RAID status |
| Operating Temperature | 5°C to 35°C (41°F to 95°F) |
| Storage Temperature | -20°C to 60°C (-4°F to 140°F) |
| Humidity | 20% to 80% non-condensing |
| Maintenance | Clean with dry cloth; avoid liquids |
| Safety | Do not disassemble; keep away from water |
| Spare Parts | Power supply, fan, drive trays available |
Frequently Asked Questions - CPR5SA Addonics
How do I set up RAID on the Addonics CPR5SA?
Connect the enclosure to your computer via eSATA or USB, then use the built-in RAID configuration menu (accessed via DIP switches or software) to select the desired RAID level (0, 1, 5, 10, or JBOD). Refer to the manual for detailed steps.
What drives are compatible with the CPR5SA?
The CPR5SA supports standard 3.5-inch SATA hard drives and SSDs. Drives up to 8TB each are typically compatible.
Can I hot-swap drives?
Yes, the CPR5SA supports hot-swapping. Remove or insert drives without powering down the enclosure, but ensure RAID configuration is properly managed to avoid data loss.
How do I know if a drive has failed?
The enclosure has LED indicators for each drive. A red or blinking light typically indicates a drive failure. Also, RAID management software can notify you.
What is the maximum storage capacity?
With five 8TB drives, the maximum raw capacity is 40TB. Usable capacity depends on the RAID level (e.g., RAID 5 gives 32TB).
Does the CPR5SA support USB 3.0?
Yes, it includes a USB 3.0 port for high-speed data transfer, along with eSATA and FireWire 800 ports.
How do I clean and maintain the enclosure?
Turn off and unplug the unit. Use a soft, dry cloth to wipe the exterior. Do not use liquids or solvents. Ensure ventilation slots are not blocked.
What should I do if the power supply fails?
Replace the internal power supply unit. Contact Addonics or an authorized dealer for a compatible spare part. Do not attempt to repair it yourself.
Can I use the CPR5SA with a Mac?
Yes, it works with Mac systems via USB or FireWire. Some RAID levels may require formatting to a compatible file system.
Is there a warranty?
Addonics typically offers a 1-year limited warranty. Check your purchase documentation or contact support for details.
User questions about CPR5SA Addonics
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Disk array in PDF format for free! Find your manual CPR5SA - Addonics and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CPR5SA by Addonics.