EB800MSV2-F24T - Server Proavio - Free user manual and instructions
Find the device manual for free EB800MSV2-F24T Proavio in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Rackmount Server |
| Form Factor | 2U |
| Dimensions (H x W x D) | 88 mm x 482 mm x 600 mm |
| Weight | 20 kg (44 lbs) |
| Power Supply | Dual Redundant 800W PSU |
| Processor | Intel Xeon Scalable 2nd Gen |
| Memory | Up to 384 GB DDR4 ECC |
| Storage Bays | 24 x 2.5" SATA/SAS |
| Network | 4 x Gigabit Ethernet |
| Expansion Slots | 3 x PCIe 3.0 x16 |
| Management | IPMI 2.0 Remote Management |
| Operating Temperature | 0°C to 40°C |
| Operating Humidity | 10% to 80% non-condensing |
| Safety Certifications | CE, FCC, RoHS |
| Included Accessories | Power Cords, Rail Kit, Quick Start Guide |
| Warranty | 3 Years Limited |
Frequently Asked Questions - EB800MSV2-F24T Proavio
How do I install the server in a rack?
Use the included rail kit to mount the server in a standard 19-inch rack. Follow the instructions in the quick start guide for proper alignment and securing.
What type of memory is supported?
The server supports DDR4 ECC registered memory up to 384 GB. Ensure modules are installed in pairs for optimal performance.
How do I access the remote management interface?
Connect to the dedicated IPMI port on the rear. The default IP is 192.168.0.120; use a web browser to access the management console.
Can I add additional hard drives?
Yes, the server has 24 hot-swap 2.5-inch drive bays supporting SATA and SAS drives. Simply insert drives into empty slots.
What should I do if the server overheats?
Check the ambient temperature and ensure proper airflow. Clean any dust from fans and vents. If the issue persists, replace the faulty fan module.
How do I reset the BIOS password?
Locate the CLR_PWD jumper on the motherboard, move it to the reset position for 5 seconds, then return to original. Power on and set a new password.
What are the LED indicators on the front panel?
There are LEDs for power status (green), HDD activity (flashing green), and system alarm (red) indicating faults.
How do I update the firmware?
Download the latest BIOS and BMC firmware from the Proavio support site. Use the IPMI web interface to upload and flash the firmware.
Can I replace the power supply unit?
Yes, the PSUs are hot-swappable. Remove the faulty unit by pressing the release latch and slide out. Insert a new unit and secure it.
What is the default administrator account?
The default root password for the IPMI interface is admin. Change it immediately after first login for security.
User questions about EB800MSV2-F24T Proavio
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Server in PDF format for free! Find your manual EB800MSV2-F24T - Proavio and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. EB800MSV2-F24T by Proavio.