VSX-1 11270 VSLS - Pare-feu matériel Check Point - Free user manual and instructions
Find the device manual for free VSX-1 11270 VSLS Check Point in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Hardware Firewall |
| Brand | Check Point |
| Model | VSX-1 11270 VSLS |
| Form Factor | 1U Rackmount |
| Dimensions (H x W x D) | 44.45 mm x 438 mm x 635 mm |
| Weight | Approximately 16 kg |
| Power Supply | Dual Redundant 460W AC |
| Firewall Throughput | Up to 40 Gbps |
| Interfaces | 4 x 10GbE SFP+, 8 x 1GbE |
| Security Features | Stateful firewall, VPN, IPS, Anti-Malware, Application Control |
| Management | Centralized via Check Point Security Management |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 70°C |
| Humidity | 10% to 85% non-condensing |
| Cooling | Built-in fans with front-to-back airflow |
| Maintenance | Regularly clean air vents; check LED status; update firmware |
| Safety Compliance | UL, CE, FCC Class A |
| Spare Parts | Power supplies, fan modules, and interface cards available |
| Repairability | Field-replaceable units with minimal downtime |
Frequently Asked Questions - VSX-1 11270 VSLS Check Point
How do I perform initial configuration of the VSX-1 11270 VSLS?
Connect to the console port using a serial cable (115200 baud, 8N1). Power on the device and follow the setup wizard to assign IP address and enable remote management via the web interface (HTTPS). Default credentials are admin/admin; change them immediately.
What are the default login credentials?
The default username is admin and the default password is admin. For security, change the password upon first login.
How do I update the firmware on this device?
Download the latest firmware from the Check Point support site. Log into the web interface, go to System > Firmware Update, upload the file, and follow the prompts. The device will reboot to apply the update.
What interface slots are available for expansion?
The VSX-1 11270 VSLS has 4 fixed 10GbE SFP+ ports and 8 fixed 1GbE ports. It does not have additional expansion slots for extra interfaces.
How can I reset the device to factory defaults?
Press and hold the reset button on the front panel for 10 seconds while the device is powered on. Release when the LEDs flash. Alternatively, use the console command set factory-default.
What are the LED indicators and their meanings?
The front panel features: Power (green when on), Status (green when normal, amber for warning, red for error), Link/Act per port (green for link, blinking for activity). Refer to the manual for full details.
How do I enable remote VPN access?
In the web interface, navigate to VPN > Remote Access. Create a new user and configure IPsec or SSL VPN settings. Ensure the appropriate ports (UDP 500, 4500) are open on your network.
Can I use the device in a high-availability cluster?
Yes, the VSX-1 11270 VSLS supports Active/Standby high availability. Connect a dedicated synchronization cable between the two units and configure the cluster settings under System > High Availability.
What should I do if the device overheats?
Check that the air intakes and exhaust vents are not blocked. Ensure ambient temperature is below 40°C. If the fan alarm sounds, contact support to replace the fan module. Do not continue operation in high temperature conditions.
How to troubleshoot no network connectivity after configuration?
Verify that cables are connected to correct ports and LEDs are lit. Check the firewall rules and ensure that default policies are not blocking traffic. Use the built-in ping and traceroute tools under Diagnostics to isolate the issue.
User questions about VSX-1 11270 VSLS Check Point
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Pare-feu matériel in PDF format for free! Find your manual VSX-1 11270 VSLS - Check Point and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. VSX-1 11270 VSLS by Check Point.