Boost SSD - SSD EDGE - Free user manual and instructions

Product Type	Solid State Drive (SSD)
Brand	Edge
Model	Boost SSD
Form Factor	2.5 inch
Interface	SATA III 6Gb/s
Storage Capacity	Various capacities available (e.g., 256GB, 512GB, 1TB)
Sequential Read Speed	Up to 550 MB/s
Sequential Write Speed	Up to 500 MB/s
NAND Flash Type	3D NAND
Operating Temperature	0°C to 70°C
Storage Temperature	-40°C to 85°C
Power Consumption	Active: 2.5W, Idle: 0.5W
Weight	Approximately 50g
Dimensions	100 x 69.85 x 7 mm
Compatibility	Desktop and laptop computers with SATA port
Compatible Operating Systems	Windows, macOS, Linux
Warranty	3 years
Package Contents	Boost SSD, installation guide, screws
Maintenance	No regular maintenance required; handle with care
Safety Precautions	Antistatic handling; avoid physical shock
Repairability	Not user-serviceable; no replaceable parts

Frequently Asked Questions - Boost SSD EDGE

Is the Edge Boost SSD compatible with my laptop?

The Edge Boost SSD uses a SATA III interface and fits standard 2.5-inch drive bays. Most laptops with a 2.5-inch SATA slot are compatible. Check your laptop's specifications to confirm.

How do I install the Edge Boost SSD?

1. Power off your computer and disconnect cables. 2. Open the case/drive bay. 3. Remove the existing drive if any. 4. Insert the Edge Boost SSD into the SATA port and secure with screws. 5. Close the case, reconnect, and boot. You may need to initialize the drive in the operating system.

What is the read/write speed of the Edge Boost SSD?

The sequential read speed is up to 550 MB/s and sequential write up to 500 MB/s, depending on the specific capacity and system configuration.

Can I use the Edge Boost SSD as an external drive?

Yes, with a SATA-to-USB adapter or external enclosure, the Edge Boost SSD can be used as a portable external drive.

Does the Edge Boost SSD come with cloning software?

The package typically does not include cloning software, but you can use free tools like Clonezilla or manufacturer-specific utilities to migrate data.

How can I check the health of my Edge Boost SSD?

Use S.M.A.R.T. monitoring tools like CrystalDiskInfo or your operating system's built-in tools to check drive health, temperature, and wear level.

What warranty does the Edge Boost SSD have?

The Edge Boost SSD comes with a 3-year limited warranty. Keep your purchase receipt for warranty claims.

Is the Edge Boost SSD compatible with Windows 10?

Yes, it is compatible with Windows 10, Windows 11, macOS, and Linux. No additional drivers are required.

My computer does not detect the Edge Boost SSD. What should I do?

1. Ensure the SATA cable is securely connected. 2. Try a different SATA port or cable. 3. Check in BIOS/UEFI if the drive appears. 4. Initialize the drive in Disk Management (Windows) or Disk Utility (macOS).

Can I upgrade the firmware on the Edge Boost SSD?

Firmware updates are rarely needed for SATA SSDs. Check the manufacturer's website for updates. Use the provided tool to update if available.

USER MANUAL Boost SSD EDGE

1. Assign a drive letter not already in use to the SSD. Select Next.

2. On the Specify Volume Size screen, ensure the Simple Volume size number matches the maximum disk space (default). Select Next.

the first screen.

1. The New Simpile Volume/Partition Wizard will appear. Select Next on

2. In the bottom pane of Disk Management, find the disk number from step 3. Right-click on the unallocated box and select New Simpile Volume.

3. You will receive an Initialize Disk prompt—this will only apply to any unformatted devices you have installed (i.e. – the SSD). Choose MBR, note the Disk number (ex Disk 1, Disk 2, etc) and select OK.

4. Select Disk Management in the left pane.

5. Right click on Computer (or My Computer) and select Manage.

using a Mac, please access uslities -> Disk utility -> Partition to initiate a format. If doing a clean install of the SSD (as a primary drive), please install and follow the instructions provided on the operating system install disc.

The Boost SSD comes unformatted—you must format the SSD before using. The following instructions are designed for formatting as a secondary drive in Windows 7. Other versions of Windows will be similar, but may vary. If

FORMATTING

1. Power on the system and ensure that the systems, BIOS recognizes the Boost SSD. Note: You will need to format the SSD before use if you plan to use it as a secondary storage drive.

state and restore power.

1. After the install is complete, responsible the computer to its original

2. Remove the old hard drive and replace with the Boost SSD. If the old hard drive has any hardware attached to it, remove it and attach to the SSD (or SSD bracket) in the same manner.

3. Disassemble your computer's casing and locate the hard drive.

4. Ensure all power sources, including the wall power adapter and battery, are discounted from your system.

INSTALLATION (continued)

FORMATTING (continued)

1. Choose a file system format (NTFS recommended for Windows) with a default allocation unit size and give the SSD a Volume Label name. Check perform a quick format and uncheck enable file and folder compression. Click Next.
2. Review the wizard summary and select Finish. The SSD will be formatted. Once complete, you can close Computer Management.

USING THE ENCRYPTION FUNCTION

The EDGE Boost SSD comes with a powerful AES hardware encryption chip. When enabled, the SSD becomes impossible to access without knowing the password. Even if the SSD is physically removed from your system, all stored data is invisible and secure. Not all systems support drive encryption (also called the ATA Security Password)—please consult your system's user manual to ensure this feature is available.

You must first enable the drive encryption to use it. Enabling this function varies from system to system, but the following is a typical example (IMPORTANT: Your SSD will be permanently inaccessible if you forget or lose your password!):

1. After installing the SSD, access your computer's BIOS during system startup.
2. Select the "Security" option.
3. Select the "Password" option.
4. Select the option displayed as "Hard Disk Password" or similar for the Boost SSD.
5. Create and reconfirm a password. After complete, the encryption function is active. You will need to input your password every time you start your computer to access the SSD.

WARRANTY

This SSD is backed by a 5-year warranty. When properly installed, EDGE Memory warrants that this product will be free from substantial defects in material and workmanship for the aforementioned warranty period. For complete warranty details, please visit www.EDGEMemory.com.

help while installing:

user manual while installing. Below are some general directions that may

desktop, or server you install the Boost SSD into—refer to your system's

Your installation experience will vary depending on the type of laptop,

INSTALLATION

SSD to minimize this

- Be conscious of static electricity—wear a wrist strap while installing the

• Do not touch the gold SATA connectors of the SSD

- Do not expose the SSD to extreme temperatures or sunlight

are disconnected from your system before installing

- Ensure all power sources, including the wall power adapter and battery,

PRECAUTIONS

• An available SATA power cable (for some desktops)

• An available SATA power connector

• A computer or server with a SATA interface connector

SYSTEM REQUIREMENTS

Visit WW.EDGEMemory.com to learn more.

Additional accessories such as buckets or trays may be required to properly install your SSD. EDGE offers various SSD install kits designed to make closing your old hard drive data to the SSD simple. Please

It is important to be familiar with the environment in which you plan to install the SSD in before getting started. Disassembly and reassessibility, please consult your system's user manual or contact an IT installation, please consult your system's user manual or contact an IT professional for assistance if you are unsure about the install process.

some precautions to adhere to.

Thank you for purchasing an EDC GE Boost SSD? This guide is designed to give you basic information on installing and using the SSD, as well as

INTRODUCTION

Version 1013-2.4

EDGE BOOST SSD

2.5" SOLID STATE DRIVE

Quick Start Guide

Help getting started with your EDGE Boost Solid State Drive

Need Help?

CUSTOMER SUPPORT

www.EDGEMemory.com/support

EDGE™

MEMORY