PLW10RD - Car speaker Pyle - Free user manual and instructions

Product Type	Car Subwoofer Speaker
Brand	Pyle
Model	PLW10RD
Speaker Size	10 Inches
Impedance	4 Ohms
Power Handling (RMS)	250 Watts
Power Handling (Peak)	500 Watts
Frequency Response	30 Hz - 1 kHz
Sensitivity	90 dB
Mounting Depth	5.12 Inches
Cutout Diameter	9.25 Inches
Overall Diameter	10.63 Inches
Magnet Weight	40 oz
Cone Material	Injection-Molded Polypropylene
Surround Material	Rubber
Voice Coil Size	2 Inches
Recommended Sealed Enclosure Volume	1.0 Cubic Feet
Recommended Ported Enclosure Volume	1.25 - 1.5 Cubic Feet
Weight	10.5 lbs
Color	Black with Red Cone
Maintenance	Wipe clean with a dry cloth. Avoid exposure to moisture.
Safety	Ensure secure mounting to prevent movement during use. Do not exceed power handling.
Spare Parts & Repairability	Contact Pyle support for replacement parts. Repairs should be performed by a qualified technician.
Warranty	1 Year Limited Warranty

Frequently Asked Questions - PLW10RD Pyle

What is the power handling of the Pyle PLW10RD?

The PLW10RD has an RMS power handling of 250 watts and a peak power handling of 500 watts. It is recommended to use an amplifier that delivers clean power within these limits.

What is the impedance of this subwoofer?

The impedance is 4 ohms, making it suitable for most car audio amplifiers. Ensure your amplifier is stable at 4 ohms.

What type of enclosure is recommended for the PLW10RD?

For a sealed enclosure, a volume of 1.0 cubic foot is recommended. For a ported enclosure, use 1.25 to 1.5 cubic feet with a port tuned to around 35 Hz.

What is the mounting depth of this speaker?

The mounting depth is approximately 5.12 inches. Ensure your enclosure has sufficient depth to accommodate the magnet structure.

Can I install this subwoofer in a factory car stereo system?

Yes, but you will need an external amplifier to power the subwoofer. Factory head units typically lack the power to drive a subwoofer efficiently.

What gauge wire should I use for the PLW10RD?

Use 12-gauge or 14-gauge speaker wire for connections to the amplifier. Ensure the wire is rated for automotive use.

How do I break in the PLW10RD subwoofer?

Play the subwoofer at moderate volume (about 50% of RMS power) for 20-30 hours to loosen the suspension. Avoid heavy distortion during break-in.

What is the frequency response of this subwoofer?

The frequency response ranges from 30 Hz to 1 kHz, optimized for deep bass reproduction.

Is the PLW10RD compatible with both sealed and ported enclosures?

Yes, the subwoofer works well in both sealed and ported enclosures. Sealed enclosures provide tighter bass, while ported enclosures offer more output at low frequencies.

What is the warranty on the Pyle PLW10RD?

Pyle offers a 1-year limited warranty against defects in materials and workmanship. Keep your receipt for warranty claims.

USER MANUAL PLW10RD Pyle

MANUFACTURER'S LIMITED ONE YEAR WARRANTY

PYLE USA warranties this unit to be free from defective material or workmanship and wil repair or replace this unit or any part there of if it proves defective in normal use or service within one (1) year from the date of original purchase.

• Our obligation under this warranty is limited to the repairing or replacing at our discretion, the defective instrument or any part there of when it is returned, transportation prepaid to the Pyle Service Center.
• This warranty will be considered void if the unit has been tampered with, improperly serviced, subjected to abuse or misuse or if instaled in a commercial vehicle.
• This warranty does not cover accidental damage.

IMPORTANT:

Pack carefully in original carton if possible. We are not responsible for damage incurred inreturning items for repair. A letter stating your exact street address, daytime phone number and the problem you are experiencing should be included. You must also enclose a copy of the original receipt as proof of date of purchase.

About Pyle Blue (Red) Label Woofer

CONGRATULATIONS! You have just purchased one of our high quality Pyle woofer. Blue (Red) Labels Series Woofer are not only in unique design, but also could deliver consistent and high performance.

We do confident that Blue (Red) Labels Series Woofer will bring you many hours of enjoyment over the years.

The General Features Pyle Woofer Include:

BLUE LABEL

• Blue CD Wave Electro-platerd Polyproylence Cone
• Wide Butyl Rubber Surround With New Pattern
• Blue Steel Basket
• Bumped & Vented Extended Pole Piece
  • High Temperature Kapton Polyamide Voice Coils
  • 4 Ohm Impedance

RED LABEL

• Red CD Wave Electro-platerd Polyproylence Cone
• Wide Butyl Rubber Surround With New Pattern
• Red Steel Basket
• Bumped & Vented Extended Pole Piece
  • High Temperature Kapton Polyamide Voice Coils
  • 4 Ohm Impedance

Questions? Issues?

We are here to help!

Phone: [phone]

Email: [e-mail]

Blue speaker with black head cover and 'PYLE' logo, shown from two different angles (no text or symbols on body)

Two red speaker models, one large and one smaller, shown from front and back angles (no visible text or symbols)

Illustration of a laptop with a red checkmark on the screen (no text or symbols)

VISIT US ONLINE:

Have a question?

Need service or repair?

Want to leave a comment?

PyleUSA.com/ContactUs

PLW10BL/PLW10RD PLW12BL/PLW12RD PLW15BL/PLW15RD

Specification	PLW10BL	PLW12BL	PLW15BL
Steel Frame	Blue	Blue	Blue
Cone	Blue Electro-platerd	Blue Electro-platerd	Blue Electro-platerd
Surround	Wide Rubber	Wide Rubber	Wide Rubber
Power (Watts Peak)	600	800	1000
Impedance (Ohm)	4	4	4
Voice Coil (Inch)	1.5" KSV	2.0" KSV	2.5" KSV
Magnet Structure	70 Oz	90 Oz	70 Oz
Fs (Hz)	35.9	26.2	20
Qms	5.72	5.81	6.23
Qes	0.83	0.90	1.1
Qts	0.73	0.78	1.0
SPL (dB)	86.7	85.5	86
Vas (L)	1.932	4.146	9.416

Specification PLW10RD		PLW12RD	PLW15RD
Steel Frame	Red	Red	Red
Cone	Red Electro-platerd	Red Electro-platerd	Red Electro-platerd
Surround	Wide Rubber	Wide Rubber	Wide Rubber
Power (Watts Peak)	600	800	1000
Impedance (Ohm)	4	4	4
Voice Coil (Inch)	1.5" KSV	2.0" KSV	2.5" KSV
Magnet Structure	70 Oz	90 Oz	70 Oz
Fs (Hz)	35.9	26.2	20
Qms	5.72	5.81	6.23
Qes	0.83	0.90	1.1
Qts	0.73	0.78	1.0
SPL (dB)	86.7	85.5	86
Vas (L)	1.932	4.146	9.416

Pyle-Blue (Red) Label-Series continually strives to improve the performance and value of its products all specifications are subject to change.