PH2.1500 - Receiver BOSS - Free user manual and instructions
Find the device manual for free PH2.1500 BOSS in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Car Stereo Receiver |
| Brand | Boss |
| Model | PH2.1500 |
| Dimensions (W x H x D) | 178 x 50 x 150 mm (1-DIN) |
| Weight | 1.5 kg |
| Power Supply | 12V DC (negative ground) |
| Max Power Output | 1500W peak (4 x 75W RMS) |
| Display | LCD with multi-color illumination |
| Connectivity | Bluetooth, USB, AUX, AM/FM tuner |
| Supported Audio Formats | MP3, WMA, WAV, FLAC |
| Equalizer | 13-band graphic EQ with presets |
| Remote Control | Included (wired or wireless) |
| Fuse Rating | 10A (internal) |
| Speaker Impedance | 4-8 ohms per channel |
| Preamp Outputs | 2 pairs (Front/Rear) + Subwoofer |
| Detachable Faceplate | Yes, for theft prevention |
| Mounting | Standard 1-DIN sleeve mount |
| Operating Temperature | -20°C to 60°C |
| Care Instructions | Clean with soft dry cloth; avoid liquids |
| Safety Features | Short-circuit protection, reverse polarity protection |
| Spare Parts | Faceplate, fuses, wiring harness (contact support) |
| Repairability Index | 7/10 (user-serviceable fuses) |
Frequently Asked Questions - PH2.1500 BOSS
How do I reset the PH2.1500 receiver?
Press and hold the reset button (usually behind the faceplate or on the front panel) for 5 seconds using a pointed object. This restores factory defaults.
Why is there no sound from the speakers?
Check speaker wire connections, ensure the unit is not muted, and verify that the balance/fader settings are centered. Also confirm the source is playing audio.
How do I pair my phone via Bluetooth?
Enable Bluetooth on your phone, press the BT button on the receiver to enter pairing mode, then select 'BOSS PH2.1500' from your phone's Bluetooth list.
What is the maximum USB drive capacity supported?
The USB port supports drives up to 32GB formatted as FAT32.
Can I connect an external amplifier?
Yes, the receiver has 2 pairs of preamp outputs (front/rear) and a dedicated subwoofer output (RCA). Use high-quality RCA cables.
How do I set the clock?
Press and hold the DISP button until the clock flashes, then rotate the volume knob to adjust hours/minutes. Press DISP again to save.
The receiver does not turn on. What should I do?
Check the vehicle's ignition fuse, the receiver's inline fuse (10A), and ensure the wiring harness is properly connected to power and ground.
How do I clean the faceplate?
Use a soft, dry microfiber cloth. Avoid abrasive cleaners or liquids. Do not spray directly onto the unit.
Can I use the receiver with a steering wheel control?
Yes, the receiver is compatible with most aftermarket steering wheel control adapters. Refer to the adapter's manual for programming.
What should I do if the radio reception is poor?
Ensure the antenna is fully extended and properly connected. Try a powered antenna amplifier if the signal is weak.
User questions about PH2.1500 BOSS
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual PH2.1500 - BOSS and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PH2.1500 by BOSS.