MBR1200B - Router Cradlepoint - Free user manual and instructions
Find the device manual for free MBR1200B Cradlepoint in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | 4G LTE Enterprise Router |
| Model | MBR1200B |
| Dimensions (W x D x H) | 8.0 x 5.5 x 1.5 inches (20.3 x 14.0 x 3.8 cm) |
| Weight | 0.8 lbs (0.36 kg) |
| Power Supply | 12V DC, 2A (external adapter) |
| Processor | Qualcomm 800 MHz |
| Memory | 128 MB Flash, 256 MB RAM |
| WAN Interfaces | 1x Gigabit Ethernet, 1x USB for LTE modem |
| LAN Interfaces | 4x Gigabit Ethernet |
| Wireless Standards | IEEE 802.11a/b/g/n/ac (2.4/5 GHz dual-band) |
| Maximum Wireless Speed | AC1200 (300 Mbps 2.4 GHz + 867 Mbps 5 GHz) |
| 4G LTE Support | Cat 4 LTE (150 Mbps down, 50 Mbps up) |
| VPN Support | OpenVPN, IPsec, PPTP, L2TP |
| Firewall Features | SPI firewall, NAT, port forwarding, ACL |
| Management | Web-based GUI, CLI, SNMP, Cloud Manager |
| Security | WPA2-PSK/WPA3, MAC filtering, VLAN |
| Mounting | Desktop or wall-mountable (bracket included) |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Certifications | FCC, CE, IC |
| Warranty | 1 year limited |
Frequently Asked Questions - MBR1200B Cradlepoint
How do I set up my Cradlepoint MBR1200B router for the first time?
Connect the router to power and your modem via Ethernet. Access the web interface at 192.168.0.1 and follow the setup wizard. Configure your WiFi SSID and password, and insert a SIM card for LTE if used.
How can I update the firmware on my MBR1200B?
Log in to the router's web interface, go to Administration > Firmware Upgrade. You can check for updates online or upload a downloaded file. Ensure you back up settings before upgrading.
What is the default login credentials for the MBR1200B?
The default username is admin and the password is password. It is strongly recommended to change both after initial setup.
How do I reset my Cradlepoint router to factory settings?
Use a paperclip to press and hold the Reset button on the router for 10 seconds until the lights flash. This restores all settings to default.
Can I use the MBR1200B without a SIM card?
Yes, the router can function as a traditional wired router using the Ethernet WAN port. LTE is optional and requires a compatible SIM.
How do I configure a VPN on the MBR1200B?
Go to VPN > OpenVPN or IPsec in the web interface. You can import client/server configurations or create new ones. Default settings allow for site-to-site or remote access VPN.
What should I do if I forget my router password?
Perform a factory reset by holding the Reset button for 10 seconds. This will erase all custom settings and restore default credentials.
How do I enable port forwarding on the MBR1200B?
Navigate to Firewall > Port Forwarding. Add a new rule specifying the external port, internal IP, and port. Save and apply.
Does the MBR1200B support mesh WiFi or extenders?
The MBR1200B does not support mesh natively, but it can be used with any WiFi extender in bridge mode. Alternatively, use Cradlepoint's cloud management for extended networks.
How can I monitor my network usage on the MBR1200B?
Log in to the web interface and go to Status > Traffic. You can view real-time bandwidth usage per interface or client. The router also supports SNMP for external monitoring.
User questions about MBR1200B Cradlepoint
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Router in PDF format for free! Find your manual MBR1200B - Cradlepoint and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MBR1200B by Cradlepoint.