DX339 - Video projector OPTOMA - Free user manual and instructions
Find the device manual for free DX339 OPTOMA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Video Projector |
| Brand | Optoma |
| Model | DX339 |
| Display Technology | DLP |
| Native Resolution | XGA (1024 x 768) |
| Brightness | 3400 ANSI Lumens |
| Contrast Ratio | 20000:1 |
| Aspect Ratio | 4:3 (Native), 16:9 Supported |
| Lamp Type | 190W P-VIP |
| Lamp Life (Normal) | Up to 5000 hours |
| Lamp Life (Eco) | Up to 8000 hours |
| Keystone Correction | ±40° Vertical |
| Zoom | 1.1x Manual |
| Inputs | HDMI, VGA, Composite, Audio |
| Outputs | VGA, Audio |
| Dimensions (W x D x H) | 296 x 228 x 87 mm |
| Weight | 2.5 kg |
| Power Consumption | 225W (Normal), <0.5W Standby |
| Noise Level | 29 dB (Eco) |
| Speakers | 2W Mono |
| Safety Features | Automatic Power Off, Overheat Protection |
| Maintenance | Clean air filter every 300 hours; replace lamp when needed |
| Spare Parts & Reparability | User-accessible lamp and filter; professional service for mainboard |
Frequently Asked Questions - DX339 OPTOMA
How do I replace the lamp in the Optoma DX339?
Turn off and unplug the projector. Wait 30 minutes for cooling. Remove the lamp cover screw, slide out the lamp module, and insert a new 190W P-VIP lamp. Tighten the screw and reset the lamp timer via the menu.
How often should I clean the air filter?
Clean the air filter every 300 hours of use. Use a vacuum cleaner to remove dust from the filter. Replace the filter if damaged to prevent overheating.
What is the recommended screen size for this projector?
The optimum screen size is 60 to 120 inches diagonal, depending on room size and lighting. Place the projector at about 1.5 to 6 meters from the screen for a clear image.
Can I connect my laptop to the Optoma DX339?
Yes, connect your laptop using a VGA or HDMI cable (HDMI recommended for better quality). Select the corresponding input source via the projector's remote or menu.
How do I adjust the keystone correction?
Press the Keystone button on the remote or navigate to the menu. Use the arrow keys to adjust vertical keystone within ±40° until the image is rectangular.
Why is my projector overheating?
Overheating often occurs due to blocked air vents or a dirty air filter. Ensure proper ventilation and clean the filter. The projector will automatically shut down if it gets too hot.
What should I do if the remote control stops working?
First, check the batteries. If that fails, ensure the remote sensor on the projector is not blocked. Try resetting the projector by unplugging it for 30 seconds. If still not working, replace the remote.
How do I focus the image?
Rotate the focus ring on the lens until the image is sharp. For best results, project a test pattern or text image and adjust slowly.
What is the lamp life of the Optoma DX339?
The lamp lasts up to 5000 hours in Normal mode and up to 8000 hours in Eco mode. Replace the lamp when the image becomes dim or a warning appears.
How do I set up the projector for the first time?
Place the projector on a stable surface at the desired distance. Connect power and your source (e.g., HDMI). Turn on the projector and adjust focus, zoom, and keystone for a clear image. Select the input source from the menu.
User questions about DX339 OPTOMA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Video projector in PDF format for free! Find your manual DX339 - OPTOMA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DX339 by OPTOMA.