REF5032CF - Pregnant INFINITY - Free user manual and instructions
Find the device manual for free REF5032CF INFINITY in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Bookshelf Speaker |
| Brand | Infinity |
| Model | REF5032CF |
| Speaker Configuration | 2-Way Bass Reflex |
| Woofer Size | 5.25 inches (133 mm) |
| Tweeter Size | 1 inch (25 mm) Silk Dome |
| Frequency Response | 55 Hz - 20 kHz |
| Impedance | 8 Ohms |
| Power Handling (RMS) | 60 Watts |
| Power Handling (Peak) | 120 Watts |
| Sensitivity | 88 dB (1W/1m) |
| Dimensions (H x W x D) | 11.8 x 7.5 x 9.8 inches (300 x 190 x 250 mm) |
| Weight | 12.3 lbs (5.6 kg) |
| Enclosure Type | Bass Reflex with Front Port |
| Input Connectors | 5-Way Binding Posts |
| Recommended Amplifier Power | 20 - 100 Watts RMS |
| Grille | Detachable Magnetic Grille |
| Magnetic Shielding | Yes |
| Cleaning | Wipe with a soft, dry cloth |
| Placement | Place on a stable surface, away from moisture |
| Spare Parts Availability | Contact authorized service center |
| Repairability | Repairs by qualified technician only |
| Safety | Do not expose to water or excessive heat |
Frequently Asked Questions - REF5032CF INFINITY
How do I connect the REF5032CF speakers to my amplifier?
Use speaker cables with banana plugs or bare wire. Connect the red terminal to the amplifier's positive output and the black terminal to negative. Ensure the amplifier is turned off during connection.
What is the recommended placement for optimal sound?
Place the speakers at ear level, at least 6 inches from the wall. Angle them slightly towards the listening position. Avoid placing them in corners to prevent bass boost.
Can I use these speakers for a home theater system?
Yes, the REF5032CF can be used as front, rear, or surround speakers in a home theater setup. They pair well with a subwoofer for enhanced bass.
What is the power handling of the REF5032CF?
The RMS power handling is 60 watts, with a peak of 120 watts. It is recommended to use an amplifier with 20-100 watts RMS per channel.
How do I clean the speakers?
Use a soft, dry microfiber cloth to gently wipe the cabinet and grille. Do not use any liquids, abrasives, or cleaning solvents.
Are the grilles removable?
Yes, the grilles are attached with magnets and can be easily removed for cleaning or to expose the drivers.
What type of amplifier should I use?
Use a stereo amplifier or receiver with 8-ohm impedance output. A high-quality amplifier with low distortion is recommended for best performance.
Can I bi-wire or bi-amp these speakers?
The REF5032CF has single binding posts, so bi-wiring or bi-amping is not supported. Use a single cable per speaker.
What should I do if the speaker sounds distorted?
Check the amplifier power: ensure it is not clipping. Verify the speaker connections are secure. Reduce the volume and ensure the speaker is not placed too close to a wall.
Where can I find spare parts or service?
Contact an authorized Infinity service center. Do not attempt to repair the speaker yourself, as it may void the warranty.
User questions about REF5032CF INFINITY
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Pregnant in PDF format for free! Find your manual REF5032CF - INFINITY and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. REF5032CF by INFINITY.