DN-16058-1 - Security Camera Digitus - Free user manual and instructions
Find the device manual for free DN-16058-1 Digitus in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Digitus |
| Model | DN-16058-1 |
| Product Type | Security Camera |
| Image Sensor | 1/2.7" CMOS |
| Resolution | 1920 x 1080 (Full HD) |
| Lens Focal Length | 2.8 mm |
| Night Vision | Up to 20 m with IR LEDs |
| Weatherproof Rating | IP66 |
| Power Supply | 12V DC / PoE (802.3af) |
| Power Consumption | Max 6W |
| Dimensions (W x H x D) | 67 x 67 x 120 mm |
| Weight | 350 g |
| Video Compression | H.265 / H.264 |
| Field of View | 100° (diagonal) |
| Operating Temperature | -30°C to 55°C |
| Storage Temperature | -40°C to 70°C |
| Mounting Type | Wall or ceiling mount |
| Alarm Input/Output | 1 input, 1 output |
| Audio | Built-in microphone |
| Network Interface | 10/100 Mbps Ethernet |
| Protocols | TCP/IP, HTTP, RTSP, ONVIF |
| Storage | MicroSD card up to 128GB (sold separately) |
Frequently Asked Questions - DN-16058-1 Digitus
How do I reset the Digitus DN-16058-1 camera to factory defaults?
Press and hold the reset button (located on the camera body) for about 10 seconds using a paper clip. The camera will reboot and restore factory settings.
What is the default IP address and login for the camera?
The default IP is 192.168.1.100, with username admin and password 123456. It is recommended to change these upon first setup.
Can I mount the camera outdoors?
Yes, the DN-16058-1 has an IP66 weatherproof rating, making it suitable for outdoor use. Ensure the cables are properly sealed.
How do I connect the camera via PoE?
Use a PoE switch or injector (802.3af compliant). Connect an Ethernet cable from the camera to the PoE device. The camera will receive power and data over the same cable.
What mobile app is compatible with this camera?
The camera works with the Digitus View app (iOS and Android). Download it from the App Store or Google Play, then add the camera via its IP or scan the QR code.
How do I enable motion detection recording?
Log into the camera's web interface, go to Settings > Motion Detection, enable it, and configure the sensitivity and detection area. For recording, set up an SD card or NAS storage.
What is the maximum SD card capacity supported?
The camera supports microSD cards up to 128GB (Class 10 or higher recommended). Insert the card into the slot under the weatherproof cover.
Can I use the camera with third-party NVR software?
Yes, the camera supports ONVIF Profile S. You can add it to any ONVIF-compatible NVR or software like Blue Iris, QNAP, or Synology.
How do I clean the camera lens?
Gently wipe the lens with a soft, dry microfiber cloth. Do not use any cleaning agents or abrasive materials, as they may damage the lens coating.
What to do if the camera is not getting power?
Check the power cable connections and ensure the power adapter is plugged in. If using PoE, verify the PoE switch/injector is working. Try a different cable or power source to isolate the issue.
User questions about DN-16058-1 Digitus
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Security Camera in PDF format for free! Find your manual DN-16058-1 - Digitus and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DN-16058-1 by Digitus.