SRP-270CUG - Printer Bixolon - Free user manual and instructions
Find the device manual for free SRP-270CUG Bixolon in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Thermal Receipt Printer |
| Model | SRP-270CUG |
| Dimensions (W x D x H) | 145 x 195 x 148 mm |
| Weight | 1.4 kg |
| Power Supply | 24 V DC, 2.5 A |
| Print Method | Direct Thermal |
| Print Speed | Up to 250 mm/s |
| Print Width | 72 mm (paper width 80 mm) |
| Paper Type | Thermal roll paper (80 mm width, 50 mm OD) |
| Interface Options | USB, Serial (RS-232), Ethernet |
| Auto Cutter | Yes, partial cut |
| Beeper | Yes |
| Maintenance | Clean print head with alcohol swab periodically |
| Safety Features | Thermal overload protection, auto shut-off |
| Spare Parts Available | Print head, cutter blade, power adapter |
| Repair Rating | Moderate – replaceable modules |
| Environmental Conditions | Operating: 5-45°C, Humidity: 20-85% |
| Included Accessories | Power adapter, USB cable, quick start guide |
Frequently Asked Questions - SRP-270CUG Bixolon
How do I load paper into the Bixolon SRP-270CUG?
Open the top cover, insert the thermal paper roll with the print side facing up, pull out a short length, and close the cover until it clicks.
What type of paper does the SRP-270CUG use?
It uses 80 mm wide thermal roll paper with a maximum outer diameter of 50 mm.
How do I connect the printer to my computer?
Use the USB cable provided (or RS-232/Ethernet) and install the driver from Bixolon’s website. The printer appears as a standard POS device.
Why is the printer not printing?
Check power, paper presence, and the error LED. If the LED is solid red, there may be a paper jam or cover open. Turn off, clear jam, and restart.
How do I clean the print head?
Turn off the printer, open the cover, and gently wipe the print head with a cotton swab moistened with isopropyl alcohol. Let it dry before use.
Can I print graphics on this printer?
Yes, the SRP-270CUG supports bit image graphics. Use appropriate commands in your POS software to print logos or barcodes.
How do I set the printer to default settings?
Turn off the printer, hold the Feed button while turning it on, then release when the printer beeps. It will reset to factory defaults.
What power adapter should I use?
Use only the supplied 24 V DC, 2.5 A adapter. Using third-party adapters may damage the printer.
How do I replace the cutter blade?
Unscrew the cutter cover, carefully remove the old blade using pliers, and install a new one (Bixolon part #XYZ). Handle with care to avoid injury.
Where can I download the full user manual?
Visit www.bixolon.com or the retailer’s support page. The manual is available in PDF format with detailed instructions.
User questions about SRP-270CUG Bixolon
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Printer in PDF format for free! Find your manual SRP-270CUG - Bixolon and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SRP-270CUG by Bixolon.