BIPAC 7402GXL - Router Billion - Free user manual and instructions
Find the device manual for free BIPAC 7402GXL Billion in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | ADSL2+ Modem Router with VoIP |
| Brand | Billion |
| Model | BIPAC 7402GXL |
| Dimensions (W x D x H) | 220 x 145 x 33 mm |
| Weight | 290 g |
| Power Supply | 12 V DC, 1.5 A |
| DSL Standard | ADSL2+ (up to 24 Mbps downstream) |
| Wireless Standard | IEEE 802.11b/g (up to 54 Mbps) |
| LAN Ports | 4 x 10/100 Mbps Ethernet |
| VoIP Ports | 2 x RJ-11 for analog phones |
| USB Port | 1 x USB 2.0 for printer or storage sharing |
| Firewall | SPI, DoS protection, VPN pass-through |
| VPN Support | IPSec, PPTP, L2TP pass-through |
| LED Indicators | Power, DSL, Internet, LAN, WLAN, VoIP |
| Maintenance | Clean with soft dry cloth; avoid liquid cleaners |
| Safety Instructions | Place in ventilated area; do not cover; keep away from water |
| Spare Parts | Power adapter, Ethernet cable, phone cable, antennas |
| Repairability | No user-serviceable parts inside; contact support for repairs |
| General Information | Intended for home/small office use; supports up to 16 VoIP SIP accounts |
Frequently Asked Questions - BIPAC 7402GXL Billion
How do I reset the Billion BIPAC 7402GXL to factory defaults?
Press and hold the Reset button on the back panel for about 10 seconds using a paperclip until the power LED flashes. Release and wait for the router to reboot.
How to set up the router for the first time?
Connect the DSL line to the DSL port, power on the router, and connect a computer to any LAN port. Open a web browser and go to 192.168.1.1. Default login is admin/admin. Follow the quick setup wizard.
How do I change the wireless network name (SSID)?
Log into the router web interface, go to Wireless > Basic Settings, and change the SSID field. Click Save and then Apply.
The router is not syncing with the DSL line. What should I do?
Check that the DSL cable is securely connected. Verify the microfilter is properly installed. If the DSL LED is off or blinking, try power cycling the router. If issue persists, contact your ISP.
How do I update the firmware?
Download the latest firmware from the Billion support website. Log into the router, go to Management > Firmware Upgrade, select the file, and click Upgrade. Do not power off during update.
How to set up VoIP phone service?
Go to VoIP > SIP Account Settings. Enter the SIP account details provided by your VoIP provider. Save and apply. Connect an analog phone to the Phone 1 or Phone 2 port.
Can I use the router without a DSL connection?
Yes, the router can be used as a regular router if you connect a cable modem or other internet source to the Internet/WAN port (the DSL port can be configured as WAN). However, the DSL modem part will be inactive.
How do I enable the firewall?
By default, the firewall is enabled. To customize, go to Security > Firewall and adjust the settings like SPI, DoS protection, and access control.
What do the LED indicators mean?
Power: solid green means power on. DSL: solid green means synced, blinking means training. Internet: solid green means internet connected. LAN: solid green for link, blinking for activity. WLAN: solid green for wireless on. VoIP: solid green for registered.
How to share a USB printer across the network?
Connect a USB printer to the router's USB port. Go to USB > Printer Server and enable it. Install the printer drivers on your computer and select the network printer via the router's IP address.
User questions about BIPAC 7402GXL Billion
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Router in PDF format for free! Find your manual BIPAC 7402GXL - Billion and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BIPAC 7402GXL by Billion.